Panasonic KX-TG1223BX, KX-TG1233BX operating instructions Telephone, Call with the base unit

TG1223-1233BX(e-e).book Page 55 Wednesday, November 15, 2006 3:32 PM

	Useful Information
Telephone
Problem	Cause & solution
I cannot make or receive calls.	L The AC adaptor or telephone line cord is not
	connected. Check the connections.
	L If you are using a splitter to connect the unit,
	remove the splitter and connect the unit to the wall
	socket directly. If the unit operates properly, check
	the splitter.
	L Disconnect the base unit from the telephone line
	and connect the line to a known working telephone.
	If the working telephone operates properly, contact
	our service personnel to have the unit repaired. If
	the working telephone does not operate properly,
	contact your service provider.
	L The dialling mode setting is incorrect. Set to
	“Tone” or “Pulse” as needed (page 12).
	L The call bar feature is turned on. Turn it off (page
	29, 34).
	L You dialled a call restricted number (page 34).
	L The key lock feature is turned on. Turn it off (page
	15).
The unit does not ring.	L The ringer volume is turned off. Adjust the handset
	ringer volume (page 26) and the base unit ringer
	volume (page 18).
	L The night mode feature is turned on. Turn it off
	(page 27, 32).
The batteries should be charging	L Clean the charge contact and charge again (page
but the battery icon does not	10).
change.	L The AC adaptor is disconnected. Plug in the AC
	adaptor.
A busy tone is heard when {C} is	L The handset is too far from the base unit. Move
pressed.	closer and try again.
	L Another handset or the base unit is on an outside
	call. Wait for the other user to complete the call.
No sound is heard when making a	L If you make a call with the base unit while the ARS
call with the base unit.	feature is turned on, no sound will be heard until the
	base unit determines which carrier should be used
	for the call.

55