Panasonic KX-PRS120 Call block, Changing the start and end time, Storing unwanted callers

Programming

4*: Select “AM” or “PM”. a MOKN

5Enter the desired hour and minute you wish to end this feature.

6*: Select “AM” or “PM”.

7 MSaveN a MOFFN

Changing the start and end time

1MMenuN (right soft key) #237

2Continue from step 3, “Turning silent mode on/off”, page 27.

Selecting groups to bypass silent mode

1MMenuN (right soft key) #241

2Select your desired groups by pressing 1 to 9.

R “” is displayed next to the selected group numbers.

R To cancel a selected group, press the same dial key again. “” disappears.

3MSaveN a MOFFN

Call block

This feature allows the unit to reject calls when:

–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 28).

–the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 28).

When a call is received, the unit rings for a short time*1 while the caller is being identified. If the phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. (Caller ID subscribers only)

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to “Off” (page 29).

Important:

RWhen the unit receives a call from a number that is stored in the call block list or

a call without a recognized phone number, the call is logged in the caller list

(page 33) with after the call is disconnected.

Storing unwanted callers

You can store up to 100 phone numbers in the call block list.

Important:

RYou must store the phone number with an area code in the call block list.

nFrom the caller list:

1 MCN CID

2 MbN: Select the entry to be blocked. a MDetailN

R To edit the number: MMenuN a MbN: “Edit” a MSelectN Press MEditN repeatedly until the phone number is shown in the 10-digit format. And then, press MSaveN. Go to step 5.

3 MMenuN

4 MbN: “Save CID” a MSelectN

5 MbN: “Call block” a MSelectN

6 MbN: “Yes” a MSelectN

7 Edit the phone number if necessary

(24 digits max.).

8 MSaveN a MOFFN

nBy entering phone numbers:

1 MMenuN (right soft key) #217

2 MMenuN a MbN: “Add” a MSelectN

3 Enter the phone number (24 digits max.).

4 MSaveN a MOFFN

Blocking incoming calls without phone number

You can reject a call when no phone number is provided, such as a call just showing “Out

of area”.

1MMenuN (right soft key) #240

2MbN: Select the desired setting. a MSaveN

28For assistance, please visit http://www.panasonic.com/help