2MbN: “On/Off” a MSelectN
3MbN: “Off” a MSelectN a MOFFN
Editing an outside monitoring number
1Press MMenuN on the handset being monitored.
2MbN: “On/Off” a MSelectN
3 MbN: “On” a MSelectN
4 MbN: Select the outside line. a MEditN
5 MMenuN a MbN: “Edit” a MSelectN 6 Edit the name if necessary. a MOKN
7Edit the phone number if necessary. a MOKN a MSelectN
Erasing an outside monitoring number
1Press MMenuN on the handset being monitored.
2MbN: “On/Off” a MSelectN
3 MbN: “On” a MSelectN
4 MbN: Select the outside line. a MEditN
5 MMenuN a MbN: “Erase” a MSelectN
6 MbN: “Yes” a MSelectN a MOFFN
Baby monitor sensitivity
You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature.
RThis feature cannot be set during a monitoring call.
1Press MMenuN on the handset being monitored.
2MbN: “Sensitivity level” a MSelectN
3MbN: Select the desired setting. a MSaveN a MOFFN
Answering the baby monitor
nWhen monitoring with a handset: Press MN to answer calls.
If you want to respond from the monitoring handset, press MMuteN.
R The monitoring handset will answer calls automatically when the auto intercom feature is set to “On” (page 16).
Note:
R If you receive an outside call when communicating with the monitored handset, you hear 2 tones. To answer the call, press MOFFN, then press MN.
nWhen monitoring from an outside line: To answer a call, follow the operation for your phone.
If you want to respond from the monitoring handset, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0.
Note:
R 2 minutes after the monitored handset starts a call, communication between the monitored handset and monitoring phone line is turned off automatically.
30For assistance, please visit http://www.panasonic.com/help