Panasonic KX-TG8232 Voice guidance language, Dialing mode, Date and time, English, Save i OFF

Preparation

Voice guidance language

You can select either “English” or “Español” as the voice guidance language of the answering system (page 30). The default setting is

“English”.

1{MENU} (center of joystick)

2Select Iby pushing the joystick in any direction. i {SELECT}

3Push the joystick up or down to select “Settings”. i {SELECT}

4Push the joystick up or down to select “Voice prompt”. i

{SELECT}

5Push the joystick up or down to select the desired language. i

{SAVE} i {OFF}

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service.

1{MENU} (center of joystick)

2Select *by pushing the joystick in any direction. i {SELECT}

3Push the joystick up or down to select “Set tel line”. i

{SELECT}

4Push the joystick up or down to select “Set dial mode”. i

{SELECT}

5Push the joystick up or down to select the desired setting. i

{SAVE} i {OFF}

Date and time

Set the correct date and time so that:

–You can use the alarm function (page 28).

–The unit will announce the day and time a message was recorded when you play back on the answering system (page 31).

1{MENU} (center of joystick)

2Select Kby pushing the joystick in any direction. i {SELECT}

3Push the joystick up or down to select “Date and time”. i

{SELECT}

4Enter the current month, date, and year.

Example: August 15, 2007

{0}{8} {1}{5} {0}{7}

5Enter the current hour and minute (12-hour clock format). Example: 9:30

{0}{9} {3}{0}

6Press {*} to select “AM” or “PM”.

7{SAVE} i {OFF}

Note:

LWhen English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used.

LIf you make a mistake when entering the date and time, push the joystick right, left, up, or down to move the cursor, then make the correction.

LThe date and time may be incorrect after a power failure. In this case, set the date and time again.

For assistance, please visit http://www.panasonic.com/help 15