Programming
Main menu | Page | ||
Initial settings | Other settings | Key tone*8 | – |
* |
| <On> |
|
|
|
|
|
|
| Auto talk*9 | 17 |
|
| <Off> |
|
|
|
|
|
|
| Caller ID edit | 24 |
|
| <On> |
|
|
|
|
|
Customer support | – | – | 29 |
+ |
|
|
|
|
|
|
|
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
*3 When the ringer volume is turned off, ~is displayed and the handset does not ring for outside calls.
However even when the ringer volume is turned off, the handset rings:
–at the minimum level for alarm and intercom calls
–at the maximum level for paging
*4 If you subscribe to a distinctive ring service (such as
*5 The preset melodies in this product are used with permission of © 2006 Copyrights Vision Inc.
*6 If you select one of the melody ringer tones, the ringer tone will continue to sound for several seconds if the caller hangs up before you answer. You may hear a dial tone or no one on the line when you answer a call.
*7 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing {FLASH} fails to pick up the call waiting call.
*8 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.
*9 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
Alarm
An alarm will sound at the set time for 3 minutes in two different alarm modes: Once or Daily. Set the date and time beforehand (page 15).
1{MENU} (center of joystick) i Ki {SELECT}
2{V}/{^}: “Alarm” i {SELECT}
3{V}/{^}: Select the desired alarm mode. i {SELECT}
28For assistance, please visit http://www.panasonic.com/help