Useful Information
Making/answering calls, intercom
Problem | Cause/solution |
w is flashing. | LThe handset is not registered to the base unit. |
| Register it (page 38). |
| LThe handset is too far from the base unit. Move |
| closer. |
| LThe base unit AC adaptor is not connected. |
| Check the connections. |
| LYou are using the handset or base unit in an |
| area with high electrical interference. Place the |
| handset and base unit away from interference |
| sources, such as antennas and mobile phones. |
|
|
w is displayed, but I | LThe handset and base unit could not |
cannot make a call. | communicate for some reason, such as |
| interference from other electrical appliances. |
| Perform the following: |
| – Move the handset and base unit away from |
| other electrical appliances. |
| – Move closer to the base unit. |
|
|
Static is heard, sound cuts | LPlace the handset and the base unit away from |
in and out. Interference | other electrical appliances. |
from other electrical units. | LMove closer to the base unit. |
| LIf your unit is connected to a telephone line with |
| DSL service, we recommend connecting a noise |
| filter between the base unit and the telephone |
| line jack. Contact your DSL provider for details. |
|
|
Noise is heard during a | LYou are using the handset or base unit in an |
call. | area with high electrical interference. Place the |
| handset and base unit away from interference |
| sources, such as antennas and mobile phones. |
|
|
The handset does not ring. | LThe ringer volume is turned off. Adjust the ringer |
| volume (page 27). |
|
|
I cannot make a call. | LThe dialing mode may be set incorrectly. |
| Change the setting (page 15). |
| LAnother handset is in use or the answering |
| system is being used. Wait and try again later. |
|
|
I cannot have a | LMake sure that an optional headset is |
conversation using the | connected properly (page 40). |
headset. |
|
|
|
I cannot make long | LMake sure that you have long distance service. |
distance calls. |
|
|
|
44For assistance, please visit http://www.panasonic.com/help