Philips 3940, AJ 3941 manual Setting Track Select, Alm, Number by pressing ∞ or §, Select again

English

ALARM

IMPORTANT !

If you want the alarm to wake you up, FIRST CHECK if:

–you have adjusted the volume loud enough when using the CD / TRACK SELECT/ RADIO alarm modes;

–you have disconnected the headphones;

–the loudspeakers are switched on if you are using amplified loudspeakers in the headphone socket.

SETTING TRACK SELECT

You can program and set a TRACK SELECT number between 01-99, when the set is in the standby mode or during CD playback.

However, if the track number programmed does not exist on your CD, the first track of the CD will be played during the alarm call.

1.Insert a CD into the CD compartment

2.Press and hold down the selected ALM 1 or 2 button and set your alarm time using the ∞ or § controls.

3.Before releasing ALARM, press the CD 2 button.

™ The display will show the CD icon • under ALM 1 or

ALM 2

4.	Hold down the TRACK SELECT button and select your track
	number by pressing ∞ or §.
5.	Release the TRACK SELECT and SEARCH ∞ or § controls
	when you have found the desired track number.
6.	To review your programmed track number, press TRACK
	SELECT again.
	™ The selected track number and alarm number will be

COMPACT
	DISC C
	LOCK
	RADIO
ALM1
AM	ALM2

z

SLUMBER

BRIGHTNESS

24	HRS
RE
SET

TRACK

SELECT

PLAY

shown.

Note:

–The BUZZER alarm option will automatically replace the CD / TRACK SELECT alarm if you have;

–inserted a CD incorrectly;

–inserted a damaged CD;

–forgotten to insert any CD.

ON		ALM1
		AM
BUZZER		zz
IN
		ALM1	BRIGHTNESS
			ALM
W
	EEKEND
S
LEEPER

12