ALARM
SETTING BUZZER MELODIES
You can set 4 different melodies for both alarm 1 or 2. The buzzer melodies are set at a fixed volume and cannot be adjusted.
1.Press and hold down the selected ALM 1 or 2 button and set your alarm time using the ∞ or § controls.
2.Before releasing ALM 1 or 2 press the BUZZER button.
™ The display will show the buzzer icon | under ALM 1 |
or ALM 2. |
|
3.Hold down BUZZER and press ∞ or § repeatedly until you find the desired melody.
–The buzzer melody and alarm number will be shown and the buzzer melody played as long as you press BUZZER
4.To review your selected buzzer melody over the speakers, press BUZZER.
SWITCHING OFF THE ALARM
English
There are three ways to switch off the alarm. Unless you cancel the alarm completely, the 24 HR RESET will be automatically selected after 59 minutes, from the time your alarm goes first off.
24 hours reset
If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day:
1.Press 24 HR RESET
™You will hear a long beep tone to confirm that the 24 HR RESET has been activated.
DAY/REPEAT ALARM
This will repeat your alarm call at 9 minutes intervals.
1.During the alarm call, press DAY/REPEAT ALARM. ™ After 9 minutes the alarm will call again.
2.You can press DAY/REPEAT ALARM again as often as desired.
™ The icon of your selected alarm 
, 
or • and ‘ : ’ in the display will flash throughout the time when DAY/REPEAT ALARM is active.
m |
| PUS H • OPEN |
|
| |
| 24 | HRS |
| RE | |
| SET | |
| TRA K |
|
SLUMBER |
| dual |
|
| alarm |
| REPEAT AL | |
|
| ARM |
RADIO | COMPACT DISC | CLOCK |
| ||
|
| RADIO |
ON | ALM1 | TRACK |
AM | SELECT | |
| ALM2 | |
13