English
INSTALLATION
Power breakdown
In the event of a power failure the set will be completely switched off. Disconnect the set first and
3 seconds or more. Most of the settings will remain in the memory, but you will need to reset the time and day on the clock.
To retain the clock time and the set alarm time(s) in the event of an AC power failure or disconnection, insert 3x AA/L6/UM3 batteries (not supplied) into the the battery compartment: this will act as a power backup. However, the time will not be illuminated on the clock display. Operation of the alarms, CD player and radio are also excluded. For clarity, the battery
backup is used to retain the set clock and alarm time(s)
only. As soon as the power supply returns, the set will resume the standby mode and the display will indicate the correct time.
1.Connect the power plug to the wall outlet.
2.Insert the batteries into the battery compartment
•Replace the batteries at least once a year to prevent battery leakage, or as often as necessary according to power breakdown usage.
Batteries contain chemical substances, so they should be disposed of properly
Connecting headphones / loudspeakers
Connect headphones / active loudspeakers with a 3.5 mm plug into the p jack.
™The
Illumination brightness
Press BRIGHTNESS once or more to change the brightness of the display.
™The brightness of the display will change in this sequence: LOW ™ MEDIUM ™ BRIGHT ™ LOW....
Clock display
The time is displayed using the 12 hour clock with AM/PM indicators.
8