Remote Control
The wireless remote control allows interaction with the RoomGroove and iPod as well as other transmitting devices such as other RoomGrooves and Klipsch cinema systems such as the
Note: This remote must be pointed at the RoomGroove for proper interaction.
Buttons
Power Press to turn the RoomGroove “On”. Press again to put the RoomGroove into “Standby” mode.
RoomGroove
iPod Selects the iPod docked in the local RoomGroove.
Aux Selects the audio device connected to the local RoomGroove (the audio device must be playing to be heard).
Listen Toggles through available sources both local and wireless.
Cinema System Sources
CD/DVD Accesses the CD/DVD drive of the cinema system connected to the KlipschCast network.
AM/FM Accesses the AM/FM tuner of the cinema system connected to the KlipschCast network.
Cab/Sat Accesses audio from the device connected to the cinema system’s Cab/Sat input connected to the KlipschCast network. The device must be delivering audio to the cinema system to be heard on the RoomGroove.
Aux 1 Accesses audio from the device connected to the cinema system’s Aux 1 input connected to the KlipschCast network. The device must be delivering audio to the cinema system to be heard on the RoomGroove.
Aux 2 Accesses audio from the device connected to the cinema system’s Aux 2 input connected to the KlipschCast network. The device must be delivering audio to the cinema system to be heard on the RoomGroove.
Track Selection ( 7and8 ) These buttons enable control of several different sources:
•When controlling the local iPod, press 7and8 to move to the previous or next track; press and hold to reverse or
•When controlling a transmitted iPod docked in another RoomGroove, press 7and8 to move to the previous or next track.
•When controlling the CD/DVD cinema system source, press 7and8 to move to the previous or next track/chapter.
•When controlling the AM/FM cinema system source, press 7and8 to move to the previous or next preset station (if no stations have been preset, these buttons will not function).
•When controlling the Cab/Sat cinema system source, press 7and8 to move to the previous or next channel.
•These buttons are
Play/Pause Press once to “Pause” play; press again to resume play.
Volume Press + or - to increase or decrease the RoomGroove volume level (local RoomGroove only).
MuteDecreases the volume of the local RoomGroove to a zero level (no sound).
4