MENU (“SET”) MODE
Set Mode Item [F34 SPEAKER] Function: Select the Speaker to be used. Available Values: REAR/F+R/FRONT/OFF Default: REAR
REAR: Outputs the receiving audio from the REAR speaker (located in the transceiver's body).
F+R: Outputs the receiving audio from both FRONT (located in the front panel) and REAR speakers.
FRONT: Outputs the receiving audio from the FRONT (located in the front panel) speaker.
OFF: Disable the FRONT and REAR Speakers.
Set Mode Item [F35 SQL BELL]
Function: Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.
Available Values: OFF/1T/3T/5T/8T/CONT (Continuous ringing)
Default: OFF
Set Mode Item [F36 SQL DCS]
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes
Default: DCS(023)
Set Mode Item [F37 SQL EXP]
Function: Enables/Disables split CTCSS/DCS coding.
Available Values: OFF/ON
Default: OFF
When this Set Mode Item is set to “ON,” you will see the following additional parameters after the “DCS” parameter while configuring Menu Item “F40 SQL TYPE”.
DCS ENC: DCS Encode only.
TONE DCS: Encodes a CTCSS tone and Decodes a DCS code.
DCS TSQL: Encodes a DCS code and Decodes a CTCSS tone. Select the desired operating mode from the selections shown above.
Set Mode Item [F38 SQL LEVL] Function: Set the squelch threshold level.
Available Values: SQL OFF/SQL MIN/SQL 01/SQL 02/ SQL 03/ SQL 04/ SQL 05/ SQL 06/ SQL MAX
Default: Amateur Bands: SQL 01, AM: SQL 01, FM: SQL 02
98 |