SMART MENU FEATURES
TCALL (Default “OFF”)
You may enable TCALL if the repeaters in your country require a
1.Press the top panel 
/
key to select “TCALL”.
2.Press the 
key.
The transmitter will automatically be activated, and a
3.You may release the 
key, and use the PTT key for activating the transmitter there- after.
TX POWER SELECT
Set the TX Power level to reduce battery drain and use the lowest power necessary to maintain reliable communications.
1.Press the top panel 
/
key to select “TX POWER”.
2.Press the 
key repeatedly to select the desired transmit
power level.
You may set the transmit power level for the 144 MHz and 430 MHz band individually.
| HIGH | MID | LOW |
144 MHz | 50 W | 20 W | 5 W |
430 MHz | 40 W |
|
|
3.Two seconds after selecting the transmitter power level, the new setting is automatically saved and the radio returns to the VFO or Memory Channel mode.
When the 
key function is set to “TX POWER” via the top panel 
/
key, the 
key may be used as the Transmit Power Level control key.
INTERCOM VOLUME CONTROL
1.Press the top panel 
/
key to select “VOL.ITCOM”.
2.Press the 
key to change the Intercom receiver audio volume level between “HIGH” and “LOW”.
3.Two seconds after selecting the Intercom receiver audio volume level, the new setting is automatically saved and the radio returns to the VFO or Memory Channel mode.
When the 
key function is set to “VOL.ITCOM” via the top panel 
/
key, the 
key may be used as the Transmit Power Level control key.
32 |