Vertex Standard FTM-10R manual All Memory Channel Recall Group Memory Mode, Memory Recall

Page 36

MEMORY OPERATION

MEMORY RECALL

Once you have stored the desired memories, you may switch from “VFO” mode to “Memory Recall” mode, and operate on just the stored memory channels.

The FTM-10Rhas two methods of recalling the memory. (1) Group Memory Mode en- ables you to recall all the Memory Channels and (2) In-band Memory Mode enables you to recall only the memory channels which are stored within the same operating band.

All Memory Channel Recall (Group Memory Mode)

1. To recall the Group Memory bank, press the front panel / keys until the “GRP” notation appears at the up- per left corner in the display for a moment. This indicates

that the “Group Memory bank” is now recalled.

2.Rotate the DIAL knob to select the desired memory channel. You may recall any of the channels stored in the FTM-10Rmemories.

3.To exit from the Memory Recall mode, press the front panel / keys to select the desired operating band.

Important Note: The memory channel is assigned to a Group Memory bank automatically. You may assign/eliminate the memory channel to/from the Group Memory bank. See page 36 for details of the operation.

Recall a memory channel which is stored in the same operating band (In-band Memory Mode)

1.Press the front panel / keys to recall the desired operating band.

If you want to recall the 144 MHz band’s memory channel, press the front panel

/ keys to recall the H-V icon.

If you want to recall the 430 MHz band’s memory channel, press the front panel / keys to recall the H-U icon.

2.Press the front panel key briefly. A -MEMORY- notation will appear on the display for a moment. This indicates that the “Memory Recall” mode is now engaged.

3.Rotate the DIAL knob to select the desired memory channel. You may recall a memory channel which is stored in the same operating band of the FTM-10R.

4.To exit from the Memory Recall mode, press the front panel key to return to the VFO mode.

34

FTM-10R OPERATING MANUAL

Image 36
Contents FTM-10R Contents Features New Concept in Ultra compact Mobile transceiversReliable and advanced performance Features Front Panel & TOP Panel KeysLED Rear Panel & LCD DC 13.8 V Cable Pigtail w/FuseRear Panel EXT SPK jackAccessories & Options Supplied AccessoriesOptional Accessories FEP-4Installation Installation TipsPreliminary Inspection Safety Information Mobile Installation Mobile Power Connections Mobile SpeakersAC Power Supplies Base Station InstallationAntenna Considerations Assumes 50-Ohm Input/Output TerminationsSeparate Installation Installation Front Panel Installation Installation Bracket Rubber NON-SEPARATE Installation Basic Operation ReceiveTransmission Smart Menu Features Display FunctionAF Dual Function Artstm Dimmer Function Dimmer 1 ÅÆ Dimmer 2 ÅÆ Dimmer 3 ÅÆMonitor Feature Intercom FunctionPublic Address Feature Reverse FeatureScan Feature Storing Smart Search MemoriesSmart Searchtm Operation Squelch Level Adjust TX Power Select Intercom Volume ControlMemory Operation Memory StorageAll Memory Channel Recall Group Memory Mode Memory RecallMemory Channel Customization Diaplay FunctionTo eliminate the memory channel from the Group Memory bank Memory Group BankMemory Channel Number Change Memory Channel SortLabeling Memory SKIP/PREFERENTIAL Scan Setting Scan TypeSquelch Level Ctcss FrequencyDCS Code Using the Standard Repeater Shift Using the Odd Split MemoryStoring Independent Transmit Frequency ODD Split Transmitter Power Level Deleting MemoryClub Channel Operation Recalling the Club ChannelActivating the Club Channel Monitor Club Channel Operation Message Feature Programming a MessageProgramming a Member List Preparations Source Transceiver Preparations Destination TransceiverCloning Cloning the MessageTo send a message SET Your Personal IDSending a Messages Receiving a Message CloningCopy/clone procedure is completed Changing the Club Channel Frequency CLOCK/TIMER Operation SET UP the ClockActivate the Clock Display the ClockDisplays the Current Time Using the Stop Watch Timer Using the Interval TimerConvenience Features Mute FeatureAutomatic Audio Volume Controller AF-VFO Feature VOX OperationTIME-OUT Timer TOT VOX SensitivityListening the AM/FM Broadcast Station Listening to External Audio Input FTM-10RBluetooth Operation PairingTo activate Bluetooth About the Bluetooth Battery IndicatorAF Dual Function AF Dual Function Ctcss Operation DCS Operation Storing the Ctcss Tone Pairs for Epcs Operation Epcsenhanced Paging & Code Squelch OperationActivating the Epcs Internet Connection Feature Wirestm SRG Sister Radio Group ModeFRG FRIENDS’ Radio Group Mode Programming the FRG codeTo accessing an FRG Node Dtmf Autodialer To load the DTMFAutodialer memoriesTo transmit the memorized telephone number Repeater Operation Standard Repeater ShiftRepeater OPERATION/BAND Expansion Automatic Repeater ShiftBand Expansion Weather Broadcast Channel Operation Severe Weather AlertMiscellaneous Setting Changing the Operating ModeChannel Step Selection PTT KEY Function KEY BeeperSmart KEY Select Repeater Shift Direction Repeater Shift OffsetAutomatic Repeater Shift Programming the KEY Assignments SCAN-RESUME Mode Scanning BandScan Direction Scan Start DirectionCTCSS/DCS/EPCS Bell Operation Split Tone OperationBattery Voltage Display Temperature DisplayClock Format Alarm SET Time SystemInterval Beep Automatic POWER-OFF APO Audio Pitch ControlVolume Setting Alert Feature Speaker SelectionMIC Gain Setting STEREO/MONAURAL SelectionMenu SET Mode Default Bold ItaricMenu Item Function Available Values Default Bold Itaric ENU ODECTCSS/DCS/DTMF Setting ODE ENUAmateur Bands SQL Set Mode Item F1 AF Auto Default OFFSet Mode Item F2 AF Dual Set Mode Item F3 AF Pitch Set Mode Item F4 AF PrestSet Mode Item F5 AF-VFO Set Mode Item F6 BeepSet Mode Item F8 BLU VOX Default PTTSet Mode Item F9 Clock Available Values OFF/AUTO/HOLD Default OFFSet Mode Item F15 Fkey SEL Default PA Set Mode Item F16 ID ListSet Mode Item F17 ID REG Set Mode Item F18 MessageSet Mode Item F24 RPT ARS Set Mode Item F26 RPT SFTSet Mode Item F27 RX EXP Set Mode Item F28 RX F CCLSet Mode Item F32 SCN Mode Default BusySet Mode Item F33 SCN Strt Set Mode Item F35 SQL Bell Default OFF Set Mode Item F36 SQL DCSSet Mode Item F37 SQL EXP Set Mode Item F39 SQL Tsqf Set Mode Item F40 SQL TypeSet Mode Item F41 Step Set Mode Item F42 StereoSet Mode Item F45 VOL.ITCOM Set Mode Item F46 VOX MICSet Mode Item F47 VOX Sens Default Set Mode Item F48 WiresReset Procedure Troubleshooting Specifications Circuit Type SensitivitySquelch Sensitivity SelectivityDeclaration by Manufacturer 0704z-0E