MEMORY OPERATION
MEMORY GROUP BANK
In the 
/
key (A “GRP” notation appears at the upper left corner in the display for a moment.). You may observe the Group Memory Bank between the Audio Line and 2 m Amateur Band.
You may assign/eliminate the memory channel to/from the Group Memory Bank. The elimi- nated memory channel is only recalled by recalling the memory channel, which is stored in the same operating band.
To eliminate the memory channel from the Group Memory bank:
1.Recall the memory channel you wish to delete from the Group Memory Bank.
2.Press and hold the 
key for one second to enter the Memory Channel Customization
mode.
3. Rotate the DIAL knob to select Menu Item “M1 GROUP.” Press the 
key briefly, then rotate the DIAL knob to se- lect “OFF;” this deletes the current memory channel from the Group Memory bank).
4. Press the [VOL/SEL] key to save the new setting and re- turn to the memory recall mode.
To
1.Press the front panel 
key to switch the VFO mode, if needed.
2.Press the front panel 
/ 
keys to recall the operating band which is the same band as the eliminated memory channel.
3.Press the front panel 
key again to switch the “Memory Recall” mode, and then rotate the DIAL knob to select the memory channel you wish to
4.Press and hold the 
key for one second to enter the Memory Channel Customization mode.
5.Rotate the DIAL knob to select Menu Item “M1 GROUP.”
6.Press the 
key briefly, then rotate the DIAL knob to select “ON;” The current memory channel will be assigned into the Group Memory bank.
7.Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.
36 |