Vertex Standard FTM-10R manual Club Channel Operation

Page 47

CLUB CHANNEL OPERATION

watched periodically, and the signal on the “Club Channel” is received.

When “Club Channel” function is activated, a noise may be heard every time the “Club Channel” is watched (once per 3 seconds). This noise is caused by checking the “Club Channel” for any signals. This is not a problem or defect of the radio.

1.Press and hold the [VOL/SEL] key for one second to activate the Menu mode.

If the display indicates the Clock, Stop Watch Timer, or Temperature, press the [VOL/ SEL] key and change to the VFO or memory mode, then perform above step.

2. Rotate the DIAL knob to select Menu Item “F10 CLUB PRI”.

3. Press the key to enable selection of this Menu Item. 4. Rotate the DIAL knob to select the desired operating mode:

AUTO: The FTM-10Rchecks the “Club Channel” each 3 seconds. When a signal is received on the “Club Channel”, the FTM-10Rwill monitor the channel until the signal drops. When the signal drops, the

FTM-10Rwill resume checking the “Club Channel” each 3 seconds.

HOLD: When a signal is received on the “Club Channel”, the FTM-10Rreceives the “Club Channel” continuously, and will not restart the “Club Channel” monitor.

OFF: Disables the Club Channel Monitor feature.

5.Press the [VOL/SEL] key for one second to save the new setting and activate Club Channel Monitor.

When the Club Channel Monitor is activated, the “PRI” icon will appear (if receiving on the VFO or memory channel) or blink (if receiving on the “Club Channel”) on the display.

When the PTT key is pressed, the FTM-10Rwill transmit on the “Club Channel”. You may change the VFO frequency or memory channel while Club Channel Monitor is active.

6.To disable the Club Channel Monitor, select “OFF” as in step 4 above. Return to the VFO or Memory Channel mode.

When the “AUTO” mode is selected in step 4 above, press the key to return to the VFO or Memory Channel mode while receiving the “Club Channel”.

The difference between “Club Channel Monitor” and “AF DUAL” feature.

(1)“Club Channel Monitor” feature watches a club channel each 3 seconds while listening to the AM/FM broadcast, audio and an amateur band signal is received.

(2)“AF DUAL” feature always receives the club channel, even if listening to the AM/ FM broadcast, audio and an amateur band signal is received. Two receivers are included. One is for AM/FM receiving, audio and the other is for the amateur bands. You cannot miss a signal on the Club Channel, anytime.

FTM-10R OPERATING MANUAL

45

Image 47
Contents FTM-10R Contents New Concept in Ultra compact Mobile transceivers FeaturesReliable and advanced performance Features Keys Front Panel & TOP PanelLED DC 13.8 V Cable Pigtail w/Fuse Rear Panel & LCDEXT SPK jack Rear PanelSupplied Accessories Accessories & OptionsFEP-4 Optional AccessoriesPreliminary Inspection InstallationInstallation Tips Safety Information Mobile Installation Mobile Speakers Mobile Power ConnectionsBase Station Installation AC Power SuppliesAssumes 50-Ohm Input/Output Terminations Antenna ConsiderationsSeparate Installation Installation Front Panel Installation Installation Bracket Rubber NON-SEPARATE Installation Receive Basic OperationTransmission Display Function Smart Menu FeaturesAF Dual Function Artstm Dimmer 1 ÅÆ Dimmer 2 ÅÆ Dimmer 3 ÅÆ Dimmer FunctionIntercom Function Monitor FeatureReverse Feature Public Address FeatureSmart Searchtm Operation Scan FeatureStoring Smart Search Memories Squelch Level Adjust Intercom Volume Control TX Power SelectMemory Storage Memory OperationMemory Recall All Memory Channel Recall Group Memory ModeDiaplay Function Memory Channel CustomizationMemory Group Bank To eliminate the memory channel from the Group Memory bankMemory Channel Sort Memory Channel Number ChangeLabeling Memory Scan Type SKIP/PREFERENTIAL Scan SettingCtcss Frequency Squelch LevelDCS Code Storing Independent Transmit Frequency ODD Split Using the Standard Repeater ShiftUsing the Odd Split Memory Deleting Memory Transmitter Power LevelActivating the Club Channel Monitor Club Channel OperationRecalling the Club Channel Club Channel Operation Programming a Message Message FeatureProgramming a Member List Cloning the Message Preparations Source TransceiverPreparations Destination Transceiver CloningSending a Messages To send a messageSET Your Personal ID Cloning Receiving a MessageCopy/clone procedure is completed Changing the Club Channel Frequency SET UP the Clock CLOCK/TIMER OperationDisplays the Current Time Activate the ClockDisplay the Clock Using the Interval Timer Using the Stop Watch TimerAutomatic Audio Volume Controller Convenience FeaturesMute Feature VOX Operation AF-VFO FeatureListening the AM/FM Broadcast Station TIME-OUT Timer TOTVOX Sensitivity FTM-10R Listening to External Audio InputPairing Bluetooth OperationAbout the Bluetooth Battery Indicator To activate BluetoothAF Dual Function AF Dual Function Ctcss Operation DCS Operation Epcsenhanced Paging & Code Squelch Operation Storing the Ctcss Tone Pairs for Epcs OperationActivating the Epcs SRG Sister Radio Group Mode Internet Connection Feature WirestmProgramming the FRG code FRG FRIENDS’ Radio Group ModeTo accessing an FRG Node To load the DTMFAutodialer memories Dtmf AutodialerTo transmit the memorized telephone number Standard Repeater Shift Repeater OperationBand Expansion Repeater OPERATION/BAND ExpansionAutomatic Repeater Shift Severe Weather Alert Weather Broadcast Channel OperationChannel Step Selection Miscellaneous SettingChanging the Operating Mode Smart KEY Select PTT KEY FunctionKEY Beeper Automatic Repeater Shift Repeater Shift DirectionRepeater Shift Offset Programming the KEY Assignments Scanning Band SCAN-RESUME ModeScan Start Direction Scan DirectionSplit Tone Operation CTCSS/DCS/EPCS Bell OperationClock Format Battery Voltage DisplayTemperature Display Interval Beep Alarm SETTime System Audio Pitch Control Automatic POWER-OFF APOSpeaker Selection Volume Setting Alert FeatureSTEREO/MONAURAL Selection MIC Gain SettingDefault Bold Itaric Menu SET ModeENU ODE Menu Item Function Available Values Default Bold ItaricODE ENU CTCSS/DCS/DTMF SettingAmateur Bands SQL Set Mode Item F2 AF Dual Set Mode Item F1 AF AutoDefault OFF Set Mode Item F6 Beep Set Mode Item F3 AF PitchSet Mode Item F4 AF Prest Set Mode Item F5 AF-VFOAvailable Values OFF/AUTO/HOLD Default OFF Set Mode Item F8 BLU VOXDefault PTT Set Mode Item F9 ClockSet Mode Item F18 Message Set Mode Item F15 Fkey SELDefault PA Set Mode Item F16 ID List Set Mode Item F17 ID REGSet Mode Item F28 RX F CCL Set Mode Item F24 RPT ARSSet Mode Item F26 RPT SFT Set Mode Item F27 RX EXPSet Mode Item F33 SCN Strt Set Mode Item F32 SCN ModeDefault Busy Set Mode Item F37 SQL EXP Set Mode Item F35 SQL BellDefault OFF Set Mode Item F36 SQL DCS Set Mode Item F42 Stereo Set Mode Item F39 SQL TsqfSet Mode Item F40 SQL Type Set Mode Item F41 StepDefault Set Mode Item F48 Wires Set Mode Item F45 VOL.ITCOMSet Mode Item F46 VOX MIC Set Mode Item F47 VOX SensReset Procedure Troubleshooting Specifications Selectivity Circuit TypeSensitivity Squelch SensitivityDeclaration by Manufacturer 0704z-0E