Vertex Standard FTM-10R manual To accessing an FRG Node

INTERNET CONNECTION FEATURE (WIRESTM)

To accessing an FRG Node

1.	Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2.	Rotate the DIAL knob to select Menu Item “F48 WIRES”.
3.	Press the	key to enable selection of this Menu Item.
4.	Rotate the DIAL knob until “MEM” appears on the display.
	This activates WiRESTM in FRG mode. The “ ” icon will
	appear on the display.
5.	Press and hold the		key for one second, then rotate the
	DIAL knob to select the Internet Memory register number
	(D1 ~ D9) corresponding to the Internet link repeater to
	which you wish to establish an Internet link.
6.	Press the [VOL/SEL] key to save the new setting and exit
	to normal operation.

7.Once the Internet Connection feature is activated per step 4

above, you may now press the key, while you are transmitting, to send out the selected DTMF string (to establish the link to the desired Internet-link node).

8.To disable the Internet Connection feature, repeat steps 1 - 4 above, selecting “OFF” in step 4, then press the [VOL/SEL] key to save the new setting and exit to normal opera- tion (the “” icon will disappear from the display).

70 FTM-10R OPERATING MANUAL