Vertex Standard FTM-10R manual Scan Type, SKIP/PREFERENTIAL Scan Setting

MEMORY OPERATION

SCAN TYPE

The FTM-10Rhas two methods of performing Memory Channel Scan; (1) All Memory Channel Scanning and (2) Scanning only memory channels which are selected via the Skip/ Preferential memory setting (see next step).

1.Press the front panel key to switch the Memory mode, if needed.

2.Press and hold the key for one second to enter the Memory Channel Customization

	mode.
3.	Rotate the DIAL knob to select Menu Item “M5 SCN TYPE.”
4.	Press the	key briefly.
5.	Rotate the DIAL knob to select desired Scan Type:
	ALL MEM: The FTM-10Rscans on all Memory Chan-
		nels.
	ONLY MEM: The FTM-10Rscans only the memory chan-
		nels that are appended with the “ONLY” flag
		via the Skip/Preferential memory setting.
6.	Press the [VOL/SEL] key to return to the memory recall
	mode. The memory channel frequency will now be displayed.

SKIP/PREFERENTIAL SCAN SETTING

The FTM-10Rallows you to set up a “Preferential Scan List”. You can “flag” channels within the memory system. When you initiate the Preferential Memory Scan, only “flagged” channels will be scanned.

1.Recall the memory channel that you wish to skip. (or Preferential Memory Channel).

2.Press and hold the key for one second to enter the Memory Channel Customization

	mode.
3.	Rotate the DIAL knob to select Menu Item “M6 SKIPONLY.”
4.	Press the	key briefly.
5.	Rotate the DIAL knob to select the desired Scan Type:
	SKIP: This memory channel is skipped during memory
	channel scans.
	ONLY: This memory channel scans during preferential

memory scans.

OFF: This memory channel scans during memory chan- nel scan.

6.Press the [VOL/SEL] key to return to the memory recall mode. The memory channel frequency will now be displayed.

FTM-10R OPERATING MANUAL 39