Vertex Standard FTM-10R manual Led

FRONT PANEL & TOP PANEL

	key	POWER key
Press this key to activate the		Press and hold this key for two seconds to toggle the
function that is selected by the		transceiver’s power on or off.
/	keys.	Lock Function:
		Press this key momentarily while the transceiver is
		turned on to toggle the key lockout feature on or off.
		P You may also lock out the PTT key when the
		LOCK mode is activated, by changing Menu Item
		“F22 PTT LOCK”. See page 87.

keys

key

P This key switches frequency control between the VFO and Memory System.

P In the VFO mode, press and hold this key for one second to enter the Memory Write mode and then press this key again to store the frequency into the memory.

P In the Memory mode, press and hold this key for one second to enter the Memory Channel Customization mode.

DIAL knob

P Selects the operating frequency and also selects the memory channel.

P Adjusts the receiver audio level when the LED to the left of the DIAL knob glows red.

P Select the Smart Menu Item and parameter when the Smart Menu is activated.

LED

P This LED glows red when adjusting the receiver audio level with the DIAL knob.

P This LED blinks orange when the Volume Setting Alert fea- ture is active.

P This LED blinks yellow when the Timer feature is active.

PPress these keys to switch the operating band as follows:

2 m Amateur Band430 MHz Amateur BandFM BC BandAM BC BandWX BandAudio LineGroup Channel2 m Amateur Band

PPress and hold this key for one second (MHz digits will blink), then rotate the DIAL knob to change the frequency in 1 MHz steps.

FTM-10R OPERATING MANUAL 5