MENU (“SET”) MODE
Set Mode Item [F24 RPT ARS]
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON/OFF
Default: ON
Set Mode Item [F25 RPT MODE] Function: Sets the Repeater Shift Direction. Available Values: RPTR OFF/RPTR
Default: Depends on the transceiver version, as well as the setting of Menu Item [F24 RPT ARS].
Set Mode Item [F26 RPT SFT]
Function: Sets the magnitude of the repeater Shift.
Available Values: 0.00 - 99.95 MHz (50 kHz increments)
Default: Depends on the operating band and transceiver version.
Set Mode Item [F27 RX EXP]
Function: Enables/Disables the band expansion.
Available Values: NORMAL/EXPAND
Default: NORMAL
When this Set Mode Item is set to “EXPAND”, you will receive the following additional
bands. |
|
|
108 - 137 MHz | 300 - 336 MHz | 470 - 800 MHz |
174 - 200 MHz | 336 - 420 MHz | 800 - 999.9875 MHz (cellular blocked) |
Set Mode Item [F28 RX F CCL]
Function: Shifting of the CPU clock frequency.
Available Values: OFF/ON
Default: OFF
This function is only used to move a spurious response “birdie,” should it fall on a desired frequency.
Set Mode Item [F29 RX M MOD]
Function: Selects the receiving mode.
Available Values: AUTO/WIDE FM/FMNARR FM/AM
Default: AUTO
96 |