Vertex Standard FTM-10R manual Mobile Power Connections, Mobile Speakers

Page 15

INSTALLATION

Mobile Power Connections

To minimize voltage drop and avoid blowing the vehicle's fuses, connect the supplied DC power cable directly to the battery terminals. Do not attempt to defeat or bypass the DC cable fuse - it is there to protect you, your transceiver, and your vehicle's electrical sys- tem.

Warning!

Never apply AC power to the power cable of the FTM-10R, nor DC voltage greater than 15.8 Volts. When replacing the fuse, use only a 15-A fuse. Failure to observe these safety precautions will void the Limited Warranty on this product.

Before connecting the transceiver, check the voltage at the battery terminals while rev- ving the engine. If the voltage exceeds 15 Volts, repair the vehicle’s voltage regulator before proceeding with installation.

Connect the RED power cable lead to the POSITIVE (+) battery terminal, and the BLACK power cable lead to the NEGATIVE (-) terminal. If you need to extend the power cable, use #12 AWG or larger insulated, stranded copper wire. Solder the splice connections carefully, and wrap the connections thoroughly with insulating electrical tape.

Before connecting the cable to the transceiver, verify the voltage and polarity of the voltage at the transceiver end of the DC cable using a DC voltmeter. Now connect the transceiver to the DC cable.


FTM-10R	Cabin »	¼ Engine Room
	Cabin »	¼ Engine Room
	RED:Positive (+)		Battery
	BLACK:Negative (-)

Mobile Speakers

The optional MLS-200-M10High-Power External Speaker includes its own swivel-type mounting bracket, and is available from your Yaesu dealer.

Other external speakers may be used with the FTM-10R, if they present the specified 8- Ohm impedance and are capable of handling the 8 Watts of audio output supplied by the FTM-10R.

FTM-10R OPERATING MANUAL

13

Image 15

Contents FTM-10R Contents New Concept in Ultra compact Mobile transceivers FeaturesReliable and advanced performance Features Keys Front Panel & TOP PanelLED DC 13.8 V Cable Pigtail w/Fuse Rear Panel & LCDEXT SPK jack Rear PanelSupplied Accessories Accessories & OptionsFEP-4 Optional AccessoriesInstallation Installation TipsPreliminary Inspection Safety Information Mobile Installation Mobile Speakers Mobile Power ConnectionsBase Station Installation AC Power SuppliesAssumes 50-Ohm Input/Output Terminations Antenna ConsiderationsSeparate Installation Installation Front Panel Installation Installation Bracket Rubber NON-SEPARATE Installation Receive Basic OperationTransmission Display Function Smart Menu FeaturesAF Dual Function Artstm Dimmer 1 ÅÆ Dimmer 2 ÅÆ Dimmer 3 ÅÆ Dimmer FunctionIntercom Function Monitor FeatureReverse Feature Public Address FeatureScan Feature Storing Smart Search MemoriesSmart Searchtm Operation Squelch Level Adjust Intercom Volume Control TX Power SelectMemory Storage Memory OperationMemory Recall All Memory Channel Recall Group Memory ModeDiaplay Function Memory Channel CustomizationMemory Group Bank To eliminate the memory channel from the Group Memory bankMemory Channel Sort Memory Channel Number ChangeLabeling Memory Scan Type SKIP/PREFERENTIAL Scan SettingCtcss Frequency Squelch LevelDCS Code Using the Standard Repeater Shift Using the Odd Split MemoryStoring Independent Transmit Frequency ODD Split Deleting Memory Transmitter Power LevelClub Channel Operation Recalling the Club ChannelActivating the Club Channel Monitor Club Channel Operation Programming a Message Message FeatureProgramming a Member List Cloning the Message Preparations Source TransceiverPreparations Destination Transceiver CloningTo send a message SET Your Personal IDSending a Messages Cloning Receiving a MessageCopy/clone procedure is completed Changing the Club Channel Frequency SET UP the Clock CLOCK/TIMER OperationActivate the Clock Display the ClockDisplays the Current Time Using the Interval Timer Using the Stop Watch TimerConvenience Features Mute FeatureAutomatic Audio Volume Controller VOX Operation AF-VFO FeatureTIME-OUT Timer TOT VOX SensitivityListening the AM/FM Broadcast Station FTM-10R Listening to External Audio InputPairing Bluetooth OperationAbout the Bluetooth Battery Indicator To activate BluetoothAF Dual Function AF Dual Function Ctcss Operation DCS Operation Epcsenhanced Paging & Code Squelch Operation Storing the Ctcss Tone Pairs for Epcs OperationActivating the Epcs SRG Sister Radio Group Mode Internet Connection Feature WirestmProgramming the FRG code FRG FRIENDS’ Radio Group ModeTo accessing an FRG Node To load the DTMFAutodialer memories Dtmf AutodialerTo transmit the memorized telephone number Standard Repeater Shift Repeater OperationRepeater OPERATION/BAND Expansion Automatic Repeater ShiftBand Expansion Severe Weather Alert Weather Broadcast Channel OperationMiscellaneous Setting Changing the Operating ModeChannel Step Selection PTT KEY Function KEY BeeperSmart KEY Select Repeater Shift Direction Repeater Shift OffsetAutomatic Repeater Shift Programming the KEY Assignments Scanning Band SCAN-RESUME ModeScan Start Direction Scan DirectionSplit Tone Operation CTCSS/DCS/EPCS Bell OperationBattery Voltage Display Temperature DisplayClock Format Alarm SET Time SystemInterval Beep Audio Pitch Control Automatic POWER-OFF APOSpeaker Selection Volume Setting Alert FeatureSTEREO/MONAURAL Selection MIC Gain SettingDefault Bold Itaric Menu SET ModeENU ODE Menu Item Function Available Values Default Bold ItaricODE ENU CTCSS/DCS/DTMF SettingAmateur Bands SQL Set Mode Item F1 AF Auto Default OFFSet Mode Item F2 AF Dual Set Mode Item F6 Beep Set Mode Item F3 AF PitchSet Mode Item F4 AF Prest Set Mode Item F5 AF-VFOAvailable Values OFF/AUTO/HOLD Default OFF Set Mode Item F8 BLU VOXDefault PTT Set Mode Item F9 ClockSet Mode Item F18 Message Set Mode Item F15 Fkey SELDefault PA Set Mode Item F16 ID List Set Mode Item F17 ID REGSet Mode Item F28 RX F CCL Set Mode Item F24 RPT ARSSet Mode Item F26 RPT SFT Set Mode Item F27 RX EXPSet Mode Item F32 SCN Mode Default BusySet Mode Item F33 SCN Strt Set Mode Item F35 SQL Bell Default OFF Set Mode Item F36 SQL DCSSet Mode Item F37 SQL EXP Set Mode Item F42 Stereo Set Mode Item F39 SQL TsqfSet Mode Item F40 SQL Type Set Mode Item F41 StepDefault Set Mode Item F48 Wires Set Mode Item F45 VOL.ITCOMSet Mode Item F46 VOX MIC Set Mode Item F47 VOX SensReset Procedure Troubleshooting Specifications Selectivity Circuit TypeSensitivity Squelch SensitivityDeclaration by Manufacturer 0704z-0E