Vertex Standard FTM-10R manual AF Dual Function

SMART MENU FEATURES

AF DUAL FUNCTION

With the “AF DUAL” function, it is possible to monitor your desired amateur band fre- quency while receiving AM, FM broadcast or Audio from the external input jack.

You may select: AM broadcast, FM broadcast, Club Channel or external line input, by changing the Menu Item “F2 AF DUAL” (The factory default is AM broadcast receiving).

1.	Set the FTM-10Rto the desired amateur band frequency by the VFO or Memory chan-
	nel selection.
2.	Press the top panel /		key to select “AF DUAL”.
3.	Press the	key to activate the AF Dual function.
	P By first setting the desired VFO or memory channel in
	step #1 above, and then starting “AF DUAL” function, both the amateur signals and
	the AM broadcast station will be received.
4.	Rotate the DIAL knob to select the desired AM Broadcast station.

PYou may switch the AM Broadcast Band frequency control between the VFO and Memory channel by pressing the key.

PWhen a signal is received in the amateur band, the AM Broadcast audio is muted. When the amateur band signal drops, the AF Dual function is resumed (monitor the amateur band frequency while receiving the AM broadcast).

PYou may transmit on the frequency set in step1 by pressing the PTT key, even if the AF Dual function is activated.

To disable the AF Dual function, press the front panel			/	keys.
P When the	key function is set to “AF DUAL” via the
top panel /	key, the	key may be used to toggle

the “AF DUAL” on/off.

FTM-10R OPERATING MANUAL 25