OPTIONAL FIELD INSTALLED ACCESSORIES
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20 amps each and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with NEMA common household receptacles.
K802R POWER PLUG KIT - Provides four 120V plugs rated 15amps each and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug is compatible with NEMA common household receptacles.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CONTROL - Portable control provides same dial range as the output control on the welder from a location up to the specified length from the welder. Has convenient plug for easy connection to the welder. The Commander 300 is equipped with a 6 pin connector for connecting the remote control.
K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, head- shield, work clamp and electrode holder. Cable is rated at 500 amps, 60% duty cycle.
(K953-1) TRAILER - Two-wheeled trailer with optional fender and light package. For highway use, consult applicable federal, state, and local laws regarding pos- sible additional requirements. There is a choice of 2 hitches, a fender & a light package. Order: K953-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-1 Fender & Light Kit
K965-1 Cable Rack
(K767-2) TRAILER - Four-wheeled steerable yard trailer for in plant and yard towing:
K887-1 ETHER START KIT - Provides maximum cold weather starting assistance for frequent starting below 10 oF (-12.2 oC). Required Ether tank is not provided with kit.
K1898-1 SPARK ARRESTOR KIT - Easily mounts to standard muffler. Approved by U.S.D.A. Forest Service.
K1604-1 OIL DRAIN KIT - Includes ball valve, hose and clamp.
K1690-1 (1 Duplex) GFCI Kit - Includes one UL approved 115V ground fault circuit interrupter duplex type receptacle with cover and installation instruc- tions.Replaces the factory installed 115V duplex recep- tacle.The receptacle of the GFCI duplex is rated at 20 amps,the maximum total current from the GFCI duplex is limited to 20 amps. Two kits are required.
K1768-1 Dual Output Meters and Gauges - Dual out- put meters provide preset ability of voltage for wire welding and current for stick welding. Measures both current and voltage when welding. Gauges includes: battery ammeter, engine temperature, and engine oil pressure. Fuel gauge is not available in kit form.
K1816-1 Full KVA Adapter Kit - Plugs into the120/240v NEMA 14-50R receptacle on case front (which accepts 4-prong plugs) and converts it to a NEMA 6-50R receptacle, (which accepts 3-prong plugs.
WARNING
Pipe Thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
