Lincoln Electric IM700-D manual Recommended Optional Equipment

C-2 ACCESSORIES C-2

RECOMMENDED OPTIONAL EQUIPMENT

STICK

K704 Accessory Kit which includes:

•Electrode holder and cable.

•Ground clamp and cable.

•Headshield.

K857 Remote Control Kit is optional for remote cur- rent control.

TIG

Magnum TIG Torch

Magnum Parts Kit and Argon gas

K930-ALL TIG Module (not required for scratch start DC TIG welding)

K936-1 Control Cable

K870 Foot Amptrol

Also available:

K963-1/-2 Hand Amptrol

K814 Arc Start Switch

K937-22 Control Cable Extension

K937-45 Control Cable Extension

K844-1 Water Valve

WIRE FEED WELDING

•	LN-25	•	LN-7
		•	LN-8
•	NA-3	•	LN-15

•LN-742 • Magnum Spool Gun & K488 Module

HIGH FREQUENCY GENERATORS FOR TIG APPLICATIONS

The K799 Hi-Freq Unit and the K930-ALL TIG Modules are suitable for use with the Commander 300. The Commander is equipped with the required R.F. bypass circuitry for the connection of high frequency generat- ing equipment. The high frequency bypass network supplied with the K799 Hi-Freq Unit does NOT need to be installed into the Commander.

The Commander and any high frequency generating equipment must be properly grounded. See the K799 Hi-Freq Unit and the K930-All TIG Module operating manuals for complete instructions on installation, oper- ation, and maintenance.

PLASMA CUTTING

Pro-Cut 55

AC TIG WELDING

Square wave TIG 175, Invertec V205T AC/DC

COMMANDER 300