Skil 3800-02 manual Assembling Dust Elbow Dust Bag

Assembly

Assembling Dust Elbow and

Dust Bag 1 FIG. 5

1. With the miter arm locked in the down position, push the dust elbow 1 onto the dust nozzle over the tabs (Figure 5).

2. The dust bag 2 attaches to the dust chute elbow 1 and is used to collect sawdust. The dust elbow can also be attached to a standard 1-1/4” vacuum tube for dust collection.

3. Position dust elbow/bag so that it does not interfere with the tool during the cutting operation for all miter/bevel settings.

4.The dust bag requires emptying when full of sawdust. Empty it frequently and after completion of sawing.

Carefully remove dust bag from dust elbow. Empty dust bag in proper trash bin by unzipping the bag. Zip the bag before installing on the dust elbow. Be extremely careful of dust disposed, materials in fine particle form may be explosive. Do not throw sawdust on an open fire. Spontaneous combustion, may in time, result from mixture of oil or water with dust particles.

2

!When sawing chemically pressure treated WARNING lumber, paint that may be lead based, or

any other materials that may contain carcinogens, use special precautions. A suitable respirator must be worn by all personnel entering the work area. Work area should be sealed by plastic sheeting and persons not protected should be kept out until work area is thoroughly cleaned.

32