Hitachi C 6DC2 Adjusting the SAW Prior to USE, Check for proper operation of the brake

English

6.Check for proper operation of the brake.

This circular saw features an electric brake that functions when the switch is released. Before using the circular saw, ensure that the electric brake functions properly. If it does not, bring the tool to an Hitachi Authorized Service Center.

7. Prepare a wooden work bench (Fig. 7)

Since the saw blade will extend beyond

the lower surface of the lumber, place the

lumber on a work bench when cutting. If

Lumber

Base

a square block is utilized as a work bench,

select level ground to ensure it is properly

stabilized. An unstable work bench will

result in hazardous operation.

CAUTION:

To avoid possible accident, always ensure that the portion of lumber remaining after cutting is securely anchored or held in position.

Saw Blade

Work Bench

Fig. 7

ADJUSTING THE SAW PRIOR TO USE

1. Adjusting the cutting depth (Fig. 8)

WARNING: If the wing-nut is loose, injury can result. Tighten it securely after adjust- ment.

To adjust cutting depth, loosen the Wing- nut and, while holding the base with one hand, move the main body up and down to obtain the prescribed cutting depth.

After adjusting to the prescribed cutting depth, tighten the Wing-nut securely.

2. Adjusting the angle of inclination

WARNING: If the wing-nut is loose, injury can result. Tighten it securely after adjust- ment.

Wing-Nut

Base

Fig. 8

18