English
4.Regulating the guide (Fig. 12)
The cutting position can be regulated by moving the guide to the left or right after loosening its
Guide
OPERATION
WARNING: | Fig. 12 |
●Never touch the moving parts.
●Never operate the circular saw with the saw blade turned upward or to the side.
●Do not fix and secure the switch lock. Besides, keep your finger off the switch trigger when the circular saw is being carried around. Otherwise, the main body switch can be inadvertently turned ON, resulting in unexpected accidents.
●Keep the light ON during cutting operation only. If it is lit ON in other cases, the main body switch can be inadvertently turned ON, resulting in unexpected accidents.
CAUTION:
●Don’t remove circular saw from workpiece during a cut while the saw blade is moving.
●Pull out the battery after completing operation.
NOTE:
Take care not to lock the motor. If the motor is locked, immediately turn the power off. If the motor is locked for a while, the motor or battery may be burnt.
1. Operation of switch (switch trigger and light switch)
(1) For safe operation of the machine, a
Switch Trigger
“switch lock” is provided on the side of a handle.
If the “switch lock” is pulled in a state where it is pressed in the direction of the arrow mark, the main switch can be turned ON.
And the “switch lock” is used as the “light switch”. If the “switch lock (light switch)” is pulled in a state, the light is turned ON.
(2)After the switch is turned ON, even when you release your hand from the switch lock, the body continues running and the light continues being turned ON as long as you keep on pulling the switch trigger.
Switch Lock
(Be used as both
Switch Lock and
Light Switch)
Fig. 13
20