Hitachi L300P Series service manual User

Function mode

	Code	Function name						SJ300 Setting range		Initial data	Note
										-FE/-FU/-F
	P001	Option1	operation			selection		00(TRP)/01(RUN)		00
		on error
	P002	Option2	operation			selection		00(TRP)/01(RUN)		00
		on error
	P010	Feed-back option selection						00(Invalid)/01(Valid)		00
	P011	Encoder pulse number						128.-9999./1000-6500(10000-65000) (pulse)		1024
		setting
	P012	Control mode selection						00(ASR mode)/01(APR mode)		00
	P013	Pulse train input mode						00(Mode 0)/01(Mode 1)/02(Mode 2)/03(Mode 3)		00
		selection
	P014	Orientation stop position						0.-4095.		0.
		setting
	P015	Orientation speed setting						0.00-99.99/100.0-120.0(Hz)		5.00
	P016	Orientation direction						00(Forward)/01(Reverse)		00
		selection
	P017	Orientation completion range						0.-9999./1000(10000) (pulse)		5
		setting
	P018	Orientation completion delay						0.00-9.99(s)		0.00
		time setting
	P019	Electronic gear position						00(Feedback)/01(Reference)		00
		selection
	P020	Electronic gear numerator of						0.-9999.		1.
		ratio setting
	P021	Electronic		gear	denominator			0.-9999.		1.
Option		of ratio setting
	P022	Position control feed-forward						0.00-99.99/100.0-655.3		0.00
		gain setting
	P023	Position control loop gain						0.00-99.99/100.0		0.50
		setting
	P025	Compensation of secondary						00(Invalid)/01(Valid)		00
		resistor selection
	P026	Over-speed detect level						0.00-99.99/100.0-150.0(%)		135.0
		setting
	P027	Speed-error over detect level						0.00-99.99/100.0-120.0(Hz)		7.50
		setting
	P031	Digital input option input						00(operator)/01(option1)/02(option2)		00
		mode selection ( Acc/Dec)
		Stop position			setting		for
	P032	orientation		input		mode		00(operator)/01(option1)/02(option2)		00
		selection
	P044	DeviceNet		running		order	of	0.00-99.99s		1.00
		monitoring timer setting
	P045	Setting in action of abnormal						00(trip)/01(trip after deceleration stop)/02(invalid)/		0.
		communication						03(free-run)04(deceleration stop)
	P046	Output	assemble			instance		20,21,100		21
		Number setting
	P047	Input	assemble			instance		70,71,101		71
		Number setting
	P048	Detect	of	idol	mode		for	00(trip)/01(trip after deceleration stop)/02(invalid)/		01
		motion setting						03(free-run)04(deceleration stop)
	P049	Pole setting of rotation speed						0-38(even only)		0
	U001	User1 selection						no/d001-P049 <-P032>		no
	U002	User2 selection						no/d001-P049 <-P032>		no
	U003	User3 selection						no/d001-P049 <-P032>		no
selection	U004	User4 selection						no/d001-P049 <-P032>		no
	U007	User7 selection						no/d001-P049 <-P032>		no
	U005	User5 selection						no/d001-P049 <-P032>		no
	U006	User6 selection						no/d001-P049 <-P032>		no
User	U008	User8 selection						no/d001-P049	<-P032>	no
	U009	User9 selection						no/d001-P049 <-P032>		no
	U010	User10 selection						no/d001-P049 <-P032>		no
	U011	User11 selection						no/d001-P049 <-P032>		no
	U012	User12 selection						no/d001-P049	<-P032>	no

(Note 1) P044-P049 are displayed on a 0.4-55kW model.

1- 9