Hitachi L300P Series service manual Return to an initialization setup Factory-shipment state

2.5 Return to an initialization setup (Factory-shipment state)

The rewritten setting value is initialized and it can return to the state at the time of factory shipments.

The career of a trip is clearable.

The contents of initialization are as follows.

RUN time and power supply ON time are unclearable.

Item		FNC mode	Data	Contents
			00	Only a trip career is cleared.
			01	Only initialization of setting value is carried out.
Initialization		b084		Setting value will be in the state at the time of
selection				factory shipments.
			02	A clearance of a trip career and a setup are
				initialized.
Initial	data	b085	00	Initial cofiguration value for inside of Japan
			01	Initial cofiguration value for Europe
selection			02	Initial cofiguration value for USA

(The initialization method)

Please initialize by the following methods after setting up the above and a setting item.

	HITACHI		POWER
			ALARM
RUN			Hz
			V
				kW
PRG			A
			%
運転	停止/ﾘｾｯﾄ	MIN	MAX
RUN	STOP/RESET
機能	1	2	記憶
FUNC			STR

	HITACH		POWER
			ALARM
RUN			Hz
			V
				kW
PRG			A
			%
運転	停止/ﾘｾｯﾄ	MIN	MAX
RUN	STOP/RESET
機能	1	2	記憶
FUNC			STR

	HITACHI		POWER
			ALARM
RUN			Hz
			V
				kW
PRG			A
			%
運転	停止/ﾘｾｯﾄ	MIN	MAX
RUN	STOP/RESET
機能	1	2	記憶
FUNC			STR

(1)Where a function key, a rise key, and a down key are pushed simultaneously, please push stop/reset key.

If a display blinks, please

detach a stop/reset. Then, please detach a function key, a rise key, and a down key.

(2)Under initialization The above-mentioned display is for the inside of Japan. Others are as follows.

(3)When displayed on a

monitor part as "d001",

it is the completion of

initialization.

Under initialization for Europe

Under initialization for USA

Under trip career initialization

A display turns around a left end .

2- 6