2.3 Check of the trip monitor contents
(1) Trip cause / Display explanation
1 |
|
Trip cause. | Inverter status at tripping |
Refer to 4.4.1 | : While reset |
(2) Output frequency at trip (Hz) | |
1 | : While standstill |
| : While deceleration |
(3) Output current at trip (A) | : While constant speed |
1 | : While acceleration |
| |
| : Running command ON while 0Hz command. |
(4) DC bus voltage at trip (V) |
|
1 | : While start procedure |
| |
| : While DC injection braking |
(5) Accumulated running time until tripping (h) | : While overload limitation |
1 |
|
(6)Accumulated power ON time until tripping (h)
1
2- 4