Hitachi L300P Series service manual Code

Function Mode

		Code
limiter,jump		A061
		A063
		A261
		A062
lower		A262
		A064
		A065
andUpper	frequency	A066
		A067
		A068
		A069
		A070
		A071
	control	A072
		A073
	PID	A074
		A075
		A076
	AVR	A081
		A082

Function name	SJ300 Setting range		Initial data	Note
			-FE/-FU/-F
1s t frequency maximum limiter	0.00, 1s t frequency lower limitter - maximum frequency(Hz)		0.00
2nd frequency maximum limiter	0.00, 2nd frequency lower limiter-2ndsetting maximum frequency(Hz)		0.00
1s t frequency minimum limiter	0.00, start frequency-maximum frequency(Hz)		0.00
2nd frequency minimum limiter	0.00, start frequency-2nd	setting maximum frequency(Hz)	0.00
Jump frequency1	0.00-99.99/100.0-400.0(Hz)		0.00
Jump frequency Width 1	0.00-10.00(Hz)		0.50
Jump frequency2	0.00-99.99/100.0-400.0(Hz)		0.00
Jump frequency Width 2	0.00-10.00(Hz)		0.50
Jump frequency3	0.00-99.99/100.0-400.0(Hz)		0.00
Jump frequency Width 3	0.00-10.00(Hz)		0.50
Acceleration stop frequency	0.00-99.99/100.0-400.0(Hz)		0.00
Acceleration stop time	0.00-60.0(s)		0.0
PID selection	00(invalid)/01(valid)		00
PID-P gain	0.2-5.0		1.0
PID-I gain	0.0-3600.(s)		1.0
PID-D gain	0.00-100.0(s)		0.00
PID scale	0.01-99.99(%)		1.00
PID feedback selection	00(feedback : OI)/01(feedback : O)		00
AVR selection	00(ON always)/01(OFF always)/02(OFF on decelerating)		00/00/02
			(230/400)/
Motor voltage selection	200/215/220/230/240,	380/400/415/440/460/480	(230/460)/
			(200/400)

		A085	Operation mode selection		00(normal operation)/01(energy-saving operation)/02(Fuzzy)	00
		A086	Energy-saving response-		0.0-100.0	50.0
			accuracy adjustment
	function
		A092	Acceleration time2		0.01-99.99/100.0-999.9/1000.-3600.(s)	15.00
		A292	Acceleration time2(2nd	motor)	0.01-99.99/100.0-999.9/1000.-3600.(s)	15.00
		A392	Acceleration time2(3rd	motor)	0.01-99.99/100.0-999.9/1000.-3600.(s)	15.00
	adjustable	A093	Deceleration time2		0.01-99.99/100.0-999.9/1000.-3600.(s)	15.00
		A293	Deceleration time2(2nd motor)		0.01-99.99/100.0-999.9/1000.-3600.(s)	15.00
		A393	Deceleration time2(3rd	motor)	0.01-99.99/100.0-999.9/1000.-3600.(s)	15.00
		A094	2nd stage adjustable selection		00(change with 2CH terminal)/01(change with setting)	00
	mode/	A294	2nd stage adjustable		00(change with 2CH terminal)/01(change with setting)	00
			selection(2nd motor)
			nd
		A095	2 acceleration frequency		0.00-99.99/100.0-400.0(Hz)	0.00
	Operation
		A295	2nd acceleration		0.00-99.99/100.0-400.0(Hz)	0.00
			frequency(2nd motor)
		A096	2nd deceleration frequency		0.00-99.99/100.0-400.0(Hz)	0.00
		A296	2nd deceleration frequency		0.00-99.99/100.0-400.0(Hz)	0.00
			(2nd motor)
		A097	Acceleration pattern selection		00(straight line)/01(S-curve)/02(U-curve)/03(reverse U-curve)	00
		A098	Deceleration pattern selection		00(straight line)/01(S-curve)/02(U-curve)/03(reverse U-curve)	00
		A101	OI start		0.00-99.99/100.0-400.0(Hz)	0.00
External frequency		A102	OI end		0.00-99.99/100.0-400.0(Hz)	0.00
		A103	OI start rate		0.-100. (%)	20.
		A104	OI end rate		0.-100. (%)	100.
	adjustment	A105	OI start selection		00(external start frequency)/01(0Hz)	01
		A111	O2 start		-400.--100./-99.9-0.00-99.9/100.-400.(Hz)	0.00
		A112	O2 end		-400.--100./-99.9-0.00-99.9/100.-400.(Hz)	0.00
		A113	O2 start rate		-100. - 100. (%)	-100.
		A114	O2 end rate		-100. - 100. (%)	100.
Accel,		A131	Acceleration curve constant		01(small swelling)-10(large swelling)	02
	Decel	A132	Deceleration curve constant		01(small swelling-10(large swelling)	02
		b001	Retry selection		00(trip)/01(0Hz start)/02(start after equal frequency)/	00
failure					03(trip after equaling frequency and deceleration stop)
		b002	Allowable under-voltage power		0.3-1.0(s)	1.0
			failure time
power
		b003	Retry wait time		0.3-100.(s)	1.0
		b004	Instantaneous power failure/		00(invalid/01(valid)/02(invalid during stop and deceleration by stop	00
Instantaneous			under-voltage trip during stop		command)
		b005	Instantaneous power failure/		00(16 times)/01(free)	00
			under-voltage retry time
	restart		selection
		b006	Open-phase selection		00(invalid)/01(valid)	00
		b007	Frequency setting to match		0.00-99.99/100.0-400.0(Hz)	0.00

1- 4