Hitachi L300P Series service manual Allowable motor selection 20-75.0kW 160kW

Function mode

	Code		Function name			SJ300 Setting range		Initial data	Note
								-FE/-FU/-F
	H001	Autotuning selection				00(Invalid)/01( Valid(the motor does not rotate) )/		00
						02( Valid(the motor rotates))
	H002	1s t	motor constant selecti on			00(Hitachi general purpose motor data)/01( Autotuning data) /		00
						02( Autotuning data with online autotuning)
	H202	2nd motor constant selection				00(Hitachi general purpose motor data)/01( Autotuning data) /		00
						02( Autotuning data with online autotuning)
	H003	1s t	allowable motor selection			0.20-75.0(kW)	<0.2-160(kW)>	Set on
								forwarding
	H203	2nd allowable motor selection				0.20-75.0(kW)	<0.2-160(kW)>	Set on
								forwarding
	H004	1s t motor pole selection				2/4/6/8(pole)		4
	H204	2nd motor pole selection				2/4/6/8(pole)		4
	H005	1s t speed response setting				0.001-9.999/10.00-65.53		1.590
	H205	2nd speed response setting				0.001-9.999/10.00-65.53		1.590
	H006	1s t stabilized factor				0. - 255.		100.
	H206	2nd stabilized factor				0. - 255.		100.
	H306	3rd stabilized factor				0. - 255.		100.
	H020	1s t	motor constant R1			0.000-9.999/10.00-65.53(ohm)		Set on
								forwarding
	H220	2nd motor constant R1				0.000-9.999/10.00-65.53(ohm)		Set on
								forwarding
	H021	1s t	motor constant R 2			0.000-9.999/10.00-65.53(ohm)		Set on
								forwarding
	H221	2nd motor constant R 2				0.000-9.999/10.00-65.53(ohm)		Set on
								forwarding
	H022	1s t	motor constant L			0.00-99.99/100.0-655.3( mH)		Set on
								forwarding
	H222	2nd motor constant L				0.00-99.99/100.0-655.3( mH)		Set on
								forwarding
	H023	1s t	motor constant I 0			0.00-99.99/100.0-655.3(A)		Set on
others								forwarding
	H223	2nd motor constant I0				0.00-99.99/100.0-655.3(A)		Set on
								forwarding
	H024	s t	motor constant J				2	Set on
The		1				0.001-9.999/10.00-99.99/100.0-9999.( kgm )		forwarding
	H224	2nd motor constant J				0.001-9.999/10.00-99.99/100.0-9999.( kgm2)		Set on
		1s t	motor constant R1					forwarding
	H030					0.000-9.999/10.00-65.53(ohm)		Set on
		(Autotuning data)						forwarding
	H230	2nd motor constant R1				0.000-9.999/10.00-65.53(ohm)		Set on
		(Autotuning data)						forwarding
	H031	1s t	motor constant R 2			0.000-9.999/10.00-65.53(ohm)		Set on
		(Autotuning data)						forwarding
	H231	2nd motor constant R 2				0.000-9.999/10.00-65.53(ohm)		Set on
		(Autotuning data)						forwarding
	H032	1s t	motor constant L			0.00-99.99/100.0-655.3( mH)		Set on
		(Autotuning data)						forwarding
	H232	2nd motor constant L				0.00-99.99/100.0-655.3( mH)		Set on
		(Autotuning data)						forwarding
	H033	1s t	motor constant I 0			0.00-99.99/100.0-655.3(A)		Set on
		(Autotuning data)						forwarding
	H233	2nd motor constant I0				0.00-99.99/100.0-655.3(A)		Set on
		(Autotuning data)						forwarding
	H034	1s t	motor constant J			0.001-9.999/10.00-99.99/100.0-9999.( kgm2)		Set on
								forwarding
	H234	2nd motor constant J				0.001-9.999/10.00-99.99/100.0-9999.( kgm2)		Set on
								forwarding
	H050	1s t	PI-control	proportion gain		0.00-99.99/100.0-999.9/1000.(%)		100.0
		setting
	H250	2nd PI-control		proportion gain		0.00-99.99/100.0-999.9/1000.(%)		100.0
		setting
	H051	1s t	PI-control	integration	gain	0.00-99.99/100.0-999.9/1000.(%)		100.0
		setting
	H251	2nd PI-control integration gain				0.00-99.99/100.0-999.9/1000.(%)		100.0
		setting
	H052	1s t	P-control	proportion	gain	0.01-10.00		1.00
		setting
	H252	2nd P-control		proportion	gain	0.01-10.00		1.00
		setting
	H060	1s t 0Hz-SLV limiter setting				0.-100.(%)		100.
	H260	2nd 0Hz-SLV limiter setting				0.-100.(%)		100.
	H070	PI-control proportion gain for				0.00-99.99/100.0-999.9/1000.(%)		100.0
		switching
	H071	PI-control integration gain for				0.00-99.99/100.0-999.9/1000.(%)		100.0
		switching
	H072	P-control proportion gain for				0.00-10.00		1.00
		switching

(Note) < > indicate the setting range of 75 to 150kW

1- 8