Powermatic 701 operating instructions Introduction Specifications, 1791310

Introduction

This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Model 701 Deluxe Bench-top Mortiser. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance to instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.

Specifications

Model No	701
Stock No	1791310
Chisel shank capacity, maximum	3/4"
Chuck capacity, maximum	1/2"
Chisel stroke, maximum	5-1/2"
Chisel center to fence distance	4-3/8"
Bushing sizes provided	5/8", 3/4"
Fence size	12-1/2" x 2-5/8"
Base size	16-5/16" x 13-3/4"
Capacity under hold-down	5"
Spindle speed	1725 RPM
Motor (TEFC)	3/4 HP, 1 PH, 4P, 115V/230, Pre-wired 115V
Weight (net/shipping)	93 / 100 lb

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6