Kompernass PDS 260 Introduction / General safety advice, Technical information, Workplace safety

QTechnical information

Nom. power input:	260 W
Rated voltage:	230V ~ 50 Hz
Nominal speed:	n0	6,000 - 11,000 min-1
Nom. oscillation speed:	n0	12,000 - 22,000 min-1
Backing plate:	360° rotatable
Protection class:	II /

Noise and vibration data:

Values determined in accordance with EN 60745. The sound pressure level (A-weighted) of the device is typically 71,4 dB(A). Uncertainty K=3 dB. The sound level while working can exceed 85 dB (A).

Wear ear protection!

Evaluated acceleration, typical: Hand / arm vibration ah = 2,309 m / s2 Uncertainty K = 1,5 m / s2

Warning! The vibration level given in these instructions has been measured in accord- ance with a standardised measurement procedure specified in EN 60745 and can be used to com- pare devices.

Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the elec- trical power tool is used regularly in particular circumstances.

Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working.

Introduction / General safety advice

I			32
D:	0	0
00			0214

General safety advice

Warning! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury.

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

1. Workplace safety

a)Keep your working area clean and clutter-free. Untidy or poorly lit working ar- eas can lead to accidents.

b)Do not work with the device in potentially explosive en- vironments in which there

are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes.

c)Keep children and other people away while you are operating the electrical tool.

Distractions can cause you to lose control of the device.

GB/IE/CY

7