Preparing for use

QSwitching on and off

Switching on:

jPress the safety lock-out 2 to the left or right and keep it pressed.

jPress the ON / OFF switch 8 . Once the saw is running you can release the safety lock-out again.

The circular saw is fitted with an electronic soft start system.

The motor starts with a delay.

Switching off:

jRelease the ON / OFF switch 8 .

QSetting the cutting angle

You can set the cutting angle accurately with the help of the cutting angle scale.

jRelease the wing screws of the cutting angle setting clamp 4 on both sides, set the desired angle on the scale and retighten the wing screws.

QSwitching the laser on and off

Switching on:

jMove the laser ON/OFF switch 14 to setting “I”.

Switching off:

jMove the laser ON/OFF switch 14 to setting “0”. Note: If the batteries become exhausted you should replace them with two new ones, type AAA 1.5 V.

QWorking with the circular saw

1.Switch on the device as described in the section about “Switching on and off” and then place it first with the front edge of the base plate 7 against the material.

2.Align the device using the guide fence 12 or with reference to marked-out line or by using the laser.

3.Saw with a even pressure whilst holding the device by the handles with both hands (see Fig. A).

QSetting the cutting depth

Note: If possible we recommend that the cutting depth is set approximately 3 mm greater than the material thickness. This should help to ensure you achieve a clean cut.

jRelease the wing screw on the cutting depth setting clamp 5 , set the required cutting depth on the scale 15 and retighten the wing screw.

QSetting the guide fence

jRelease the wing screw 10 of the base plate 7 and insert the guide fence 12 into the slot 11 . Retighten the wing screw 10 .

QSetting the speed

jTurn the wheel 1 to the desired speed setting (arrow marking G)

(1 = lowest speed / 6 = highest speed):

Use the general settings suggested in the following table (information offered without liability) or adjust the speed setting on the setting wheel 1 to the material being cut.

Material	Speed setting

Hard- and softwood (solid wood) cut	6
longitudinally and transversely

Plywood, hard fibre board	6

Chipboard	6

Blockboard, laminated wood	6

Coated and veneered board	6

PVC board	3-5

GB/IE/CY 13

PHKS 1450 LASER specifications

The Kompernass PHKS 1450 LASER is a powerful and versatile power tool that is designed to cater to the needs of both DIY enthusiasts and professionals. Its standout feature is the integrated laser guide, which enhances precision and accuracy in multiple cutting applications, making it an invaluable addition to any workshop.

With a robust motor rated at 1450 watts, the PHKS 1450 LASER delivers impressive cutting performance across various materials, including wood, plastic, and metal. This high power output ensures that users can tackle even the most challenging projects with ease. The tool is well-balanced and ergonomically designed, which minimizes user fatigue during extended use and allows for greater control over the cutting process.

One of the key characteristics of the PHKS 1450 LASER is its adjustable cutting depth and angle, which provides versatility. It can perform bevel cuts up to 45 degrees and can cut through materials at varying thicknesses. This adaptability makes it suitable for a wide range of applications, from framing and flooring to crafting and home improvement projects.

The laser guide integrated into the design enhances cutting precision. This feature projects a visible line on the workpiece, allowing users to align their cuts accurately. Coupled with the high-quality carbide-tipped blades that can be easily swapped out, the cutting performance is exceptional and ensures clean, splinter-free edges.

Safety is also a priority with the PHKS 1450 LASER, featuring protective guards and a stable base that provide improved safety while in use. The tool is equipped with an anti-vibration system, which dampens vibrations and results in greater stability, allowing for more accurate cuts.

Furthermore, the compact and lightweight design of the Kompernass PHKS 1450 LASER makes it easy to transport, while its sturdy construction ensures longevity and durability. Whether working at home or on-site, users can rely on this tool for consistent performance.

In summary, the Kompernass PHKS 1450 LASER combines power, precision, and safety in an easy-to-use design, making it a top choice for anyone looking to enhance their cutting capabilities. Its laser guide, adjustable features, and ergonomic build make it a standout among power tools, ensuring optimal results in various cutting tasks.