General safety advice

the workpiece. The automatic blade guard must be allowed to operate automatically for all saw cuts.

d)Do not put the saw down on a work bench or the floor without the automatic blade guard covering the saw blade. If unprotected, a rotating saw blade moves the saw against the cutting direction and saws whatever is in its way. Always be aware that the saw blade takes some time to stop.

Special safety advice for circular saws and riving knives

a)Use the riving knife matched to the installed saw blade. The riving knife must be thicker than the body of the blade but thinner than the width of the teeth.

b)Adjust the riving knife as described in the operating instructions. If its thickness, position or alignment is incorrect, this can lead to the riving knife not effectively preventing kickback.

c)Always use the riving knife, except for plunge cuts. After completing plunge cutting, put the riving knife back in place. The riving knife interferes with plunge cuts and can result in kickback.

d)For the riving knife to work properly, it must be within the saw gap. The riving knife is ineffective in preventing kickback for short cuts.

e)Do not operate the saw if the riving knife is bent out-of-true. Even a slight defect can cause the blade guard to close too slowly.

To avoid the device kicking back: Kickback occurs as a result of incorrect use or misuse of the saw. It can be prevented by taking the appropriate precautions as described below.

a)Hold the saw with both hands and bring your arms into a position in which you will be able to withstand any kickback forces. Always stand to the side of the saw blade and never bring your body in line with the saw blade. When kickback occurs, the circular saw may jump backwards but the

operator can control the kickback forces by adopting suitable precautions.

b)If the saw blade jams or sawing stops for another reason, release the ON/OFF switch and hold the saw in the workpiece without moving

it until the saw blade comes to a complete standstill. Never try to remove the saw from the workpiece or move it backwards until the saw blade has stopped moving or cannot cause a kickback. Find the reason for the saw blade jamming and take the appropriate action to rectify it.

c)If you wish to restart a saw that has been inserted into the workpiece, centre the saw blade in the saw gap and check that the saw teeth do not catch on the workpiece. If the saw blade jams, it may move itself out of the workpiece or cause a kickback when the saw is restarted.

d)Support boards whilst cutting to reduce the risk of kickback caused by a jammed saw blade. Large boards may bend under their own weight. Boards must be supported on both sides as well as near the saw gap and at the edges.

e)Do not use blunt or damaged saw blades. Saw blades with blunt or misaligned teeth are in effect too wide for the designed saw gap and this gives rise to increased friction, jamming and kickback.

f)Make sure that the cutting depth and angle setting fastenings are tightened before sawing starts. If these settings move during sawing, this can lead to the saw blade jamming and kickback.

g)Be particularly careful when carrying out a plunge cut in an obscured area, e.g. in an existing wall. The plunging blade could jam in a hidden object and cause kickback.

GB/IE/CY 11

PHKS 1450 LASER specifications

The Kompernass PHKS 1450 LASER is a powerful and versatile power tool that is designed to cater to the needs of both DIY enthusiasts and professionals. Its standout feature is the integrated laser guide, which enhances precision and accuracy in multiple cutting applications, making it an invaluable addition to any workshop.

With a robust motor rated at 1450 watts, the PHKS 1450 LASER delivers impressive cutting performance across various materials, including wood, plastic, and metal. This high power output ensures that users can tackle even the most challenging projects with ease. The tool is well-balanced and ergonomically designed, which minimizes user fatigue during extended use and allows for greater control over the cutting process.

One of the key characteristics of the PHKS 1450 LASER is its adjustable cutting depth and angle, which provides versatility. It can perform bevel cuts up to 45 degrees and can cut through materials at varying thicknesses. This adaptability makes it suitable for a wide range of applications, from framing and flooring to crafting and home improvement projects.

The laser guide integrated into the design enhances cutting precision. This feature projects a visible line on the workpiece, allowing users to align their cuts accurately. Coupled with the high-quality carbide-tipped blades that can be easily swapped out, the cutting performance is exceptional and ensures clean, splinter-free edges.

Safety is also a priority with the PHKS 1450 LASER, featuring protective guards and a stable base that provide improved safety while in use. The tool is equipped with an anti-vibration system, which dampens vibrations and results in greater stability, allowing for more accurate cuts.

Furthermore, the compact and lightweight design of the Kompernass PHKS 1450 LASER makes it easy to transport, while its sturdy construction ensures longevity and durability. Whether working at home or on-site, users can rely on this tool for consistent performance.

In summary, the Kompernass PHKS 1450 LASER combines power, precision, and safety in an easy-to-use design, making it a top choice for anyone looking to enhance their cutting capabilities. Its laser guide, adjustable features, and ergonomic build make it a standout among power tools, ensuring optimal results in various cutting tasks.