Woodstock W1811 manual Spacing, Plate, =`li\% Rip fence installed on fence Base

N(/((('Jc`[`e^KXYc\JXn

()% Slide the rip fence base on the rail, and check the spacing between the rip fence base and scale bar (see =`^li\(0). There should be a minimum of 1⁄8" of space between the scale bar and the fence base. Adjust the mounting position of the rip fence rail to create this space evenly along the length of the scale bar, then tighten the rail mounting nuts.

Spacing

J<KLG

Efk\1K_\]\eZ\j_flc[jc`[\jdffk_cpfek_\iX`c2 `]`k[f\jek#i\dfm\k_\]\eZ\YXj\Xe[X[aljkk_\ jgi`e^gi\jjli\gcXk\dflek`e^gfj`k`fefek_\]\eZ\ YXj\j\\=`^li\)' #Ypcffj\e`e^k_\knfjZi\nj Xe[i\gfj`k`fe`e^k_\gi\jjli\gcXk\jc`^_kcp%

=`^li\(0% Fence base installed; spacing

between fence base and scale bar.

Spring Pressure

Plate

Rip Fence

Lever

=`^li\)'% Location of spring pressure

plate for fence slide adjustments.

(*% Thread the rip fence lever into the fence base (=`^li\)'), tighten the hex nut against the rip fence base to keep the lever in place.

(+% Slide the rip fence on the fence base T-bar as shown in =`^li\)(. Use the two lock levers on the opposite side of the fence base to secure the fence in position.

Rip Fence

T-Bar

Lock Levers

=`^li\)(% Rip fence installed on fence

base.

-20-