Woodstock W1811 manual =`li\

		N(/((('Jc`[`e^KXYc\JXn
(0%	Slide the pivot stud assembly and the M8-1.25 x 60	Pivot Stud
	T-bolt into the crosscut fence T-slot, as shown in
		Assembly
	=`^li\),.
)'% Align the T-bolt and pivot stud with the crosscut
	table insertion points (=`^li\),), and install the
	fence on the table.
)(% Thread the M8-1.25 knob with an 8mm flat washer			%%%kfK$Yfck
	onto the bottom of the T-bolt from the underside of		=cXkNXj_\i
	the table.		BefY	/dd
		T-Bolt M8-1.25 x 60
			D/$(%),o,,

J<KLG

))% Hold the crosscut fence against the positive stop bolt, shown in =`^li\)-, then tighten the knob underneath the crosscut table to lock the crosscut fence in position.

Efk\1K_`jgfj`k`m\jkfgYfckZXeY\]`e\$kle\[cXk\i kf\ejli\k_Xkk_\ZifjjZlk]\eZ\`jjhlXi\kfk_\ YcX[\%

=`^li\),% Pivot stud and T-bolt installed

in crosscut fence.

Positive

Stop Bolt

=`^li\)-%Positive stop bolt against the

crosscut fence.

)*% Install the flip stops in the T-slot on the crosscut fence, as shown in =`^li\)., and use the crosscut fence lock knob to secure the extendable end of the fence in position.

Flip Stops

Crosscut Fence Lock Knob

M8-1.25 x 25

=`^li\).% Flip stops installed on crosscut

fence.

-22-