Woodstock W1811 manual Efe$Kifl Kifl Lkj, Efe$Kifllkj

FG<I8K@FEJ

	N(/((('Jc`[`e^KXYc\JXn
Efe$K_ifl^_K_ifl^_
:lkj
Efe$K_ifl^_:lkj
A non-through cut is a sawing operation where the blade	=\eZ\
does not protrude above the top face of the wood stock,
as shown in Figure +/.	JXn9cX[\
Examples of non-through cuts include dadoes and	Nfibg`\Z\
rabbets. Non-through cuts have a higher risk of injury
from kickback because the splitter and blade guard
must be removed. When making non-through cuts with a
standard blade, the riving knife MUST be installed. When
making non-through cuts with a dado blade, extreme	=`^li\+/% Example of a non-through cut.
care, including using multiple light passes must be used,
because neither the blade guard or riving knife can be
used.

JX]\kpgi\ZXlk`fejXe[`ejkilZk`fej]fi\XZ_kpg\f]Zlk

Xi\cfZXk\[fek_\]fccfn`e^gX^\j1

› ;X[f:lkj1GX^\+,

› IXYY\k:lkj1GX^\+.

› I\jXn`e^:lkj1GX^\+0

K_ifl^_:lkj
A through cut is a sawing operation in which the
workpiece is completely sawn through, as shown in Figure
+0. Examples of through cuts are rip cuts, cross cuts,	=\eZ\
miter cuts, and beveled cuts. The blade guard assembly
	JXn9cX[\
MUST be used when performing through cuts.
	Nfibg`\Z\
Read, understand, and follow instructions and safety
precautions for each type of cut to reduce the risk of
injury.

JX]\kpgi\ZXlk`fejXe[`ejkilZk`fej]fi\XZ_kpg\f]Zl	k
		
Xi\cfZXk\[fek_\]fccfn`e^gX^\j1
				=`^l		i\+0% Example of a through cut
			(b		lad	e guard not shown for illustrative
› I`g:lkj1GX^\+'
						clarity).
› :ifjjZlkj1GX^\+)

› D`k\i:lkj1GX^\++

-32-