Woodstock W1811 manual IfjjZlkk`eLj`eI`g=\eZ\XjXlk$FXl

N(/((('Jc`[`e^KXYc\JXn

:ifjjZlkk`e^

This saw can crosscut full size panels with the crosscut fence in the forward or rear position, although it is easier to load full size panels with the crosscut fence mounted in the forward position (see =`^li\.)).

Forward Mounted

Crosscut Fence

FG<I8K@FEJ

Figure .). Crosscut fence mounted in

forward position.

Mounting the crosscut fence in the rear position (=`^li\

.*) gives greater stability for crosscutting smaller panels.

Rear Mounted

Crosscut Fence

Figure .*. Crosscut fence mounting in rear

position.

In addition, this machine has the capability of crosscutting workpieces while using the rip fence as a cut-off gauge (=`^li\ .+)—as long as the rip fence is positioned in front of the blade (see =`^li\.').

Determine which cutting operation will be best suited for the workpiece to be crosscut.

—If you will be crosscutting full size panels, then skip ahead to :ifjjZlkk`e^=lccJ`q\GXe\cj.

—If you will be crosscutting smaller panels, then skip ahead to :ifjjZlkk`e^JdXcc\iGXe\cj.

—If you will be crosscutting workpieces using the rip fence as a cut-off gauge, then skip ahead to

:ifjjZlkk`e^Lj`e^I`g=\eZ\XjX:lk$F]]>Xl^\.

Figure .+. Crosscutting workpieces using the rip fence as a cut-off gauge.

-42-