Sterling SSV-052R, SSV-05R operating instructions Installing the Conveyor Hopper

Page 13

2-2 Installing the Conveyor Hopper

The single conveyor unit is insensitive to shocks and can be installed directly on the processing machine.

Make sure that all connections are tight so that the conveying performance is not impaired. The conveyor hopper is equipped with a universal flange.

Depending on the position, drill the holes for fastening the conveyor hopper to the processing machine.

Mount the conveyor hopper on the processing machine.

Install the vinyl flexible hose on the conveyor hopper and on the venturi assemblies using the hose clamps that are part of the supply.

Note: The hopper should not touch any other component.

4.3 In. (110 mm)

0.43 In.

(11 mm)

4.3In.

(110 mm)

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style

12 of 36

Image 13

Contents SSV-05R Page Parts and Service Department Table of Contents Safety Instructions Page Operating Personnel Explanations and InformationHow to Use This Manual For Your SafetyMaintenance Responsibility Unit Safety Installation XSV-05 Parts General InformationInstalling the Conveyor Hopper Control and Maintenance Unit Installing the Control and Maintenance UnitVenturi Assembly Connecting the Compressed Air SupplyCheck with the local electricity board for regulations Electrical ConnectionMethod of Functioning Functional DescriptionControl and Maintenance Unit Setting the Mixing Ratio of the Components XSV-05/2R Units SetupPreparations Filling Level Too High Basic Setting of the Filling Level in the Conveyor HopperFine Adjustment of the Filling Level in the Conveyor Hopper Maintenance Daily Maintenance IntervalsXSV-05 Cleaning/Replacing the Filter CartridgeDisassembly Adjusting the Level ProbeProblem TroubleshootingPage Technical Data Dimension Sheet XSV-05/R XSV-05/2R Spare Parts Lists XSV-05R XSV-05/2R Position ID Number Designation Quick Start Guide -XSV Venturi Loader Parts Department Technical Assistance