Sterling SSV-05R, SSV-052R operating instructions For Your Safety, How to Use This Manual

Page 8

1-3 For Your Safety

How to Use This Manual

Please read this manual carefully before initial operation. Understanding the instructions and equipment will help to avoid injuries as well as damage to equipment. If you have questions, contact the manufacturer.

The operators of this unit must be at least 16 years old.

Store this manual near the site of the machine so that it is readily available to the operators. Faulty operation may lead to accidents!

Note that, for reasons of brevity, not every possible case of operation or maintenance can be mentioned in this manual.

Be aware of all safety instructions and danger signs on the unit. This will avoid injuries and damage to material.

Prepare precise instructions of the unit using this manual. Faulty operation can lead to accidents!

Warnings and Precautions

Only PROPERLY TRAINED individuals familiar with the information in this manual should use this equipment.

Proper clothing should be worn at all times in order to avoid injuries.

Compare the connected loads to those of the main supply to avoid electrical shock.

When using lifting gear, pay close attention to the corresponding instructions to avoid accidents.

Operate this equipment within the local regulations and requirements of the plant.

NEVER modify or alter the unit without the manufacturer’s permission.

If the unit has been switched off for safety reasons, it must be protected from unauthorized use.

The unit is exclusively intended for conveying plastic granules and regrind. Any other usage is not permitted.

This unit is not suitable for processing foods.

Attachments that are not delivered by the manufacturer must be constructed according to the safety standard EN 294.

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style

7of 36

Image 8
Contents SSV-05R Page Parts and Service Department Table of Contents Safety Instructions Page Explanations and Information Operating PersonnelFor Your Safety How to Use This ManualMaintenance Responsibility Unit Safety Installation General Information XSV-05 PartsInstalling the Conveyor Hopper Installing the Control and Maintenance Unit Control and Maintenance UnitConnecting the Compressed Air Supply Venturi AssemblyElectrical Connection Check with the local electricity board for regulationsFunctional Description Method of FunctioningControl and Maintenance Unit Preparations SetupSetting the Mixing Ratio of the Components XSV-05/2R Units Basic Setting of the Filling Level in the Conveyor Hopper Filling Level Too HighFine Adjustment of the Filling Level in the Conveyor Hopper Maintenance Maintenance Intervals DailyCleaning/Replacing the Filter Cartridge XSV-05Adjusting the Level Probe DisassemblyTroubleshooting ProblemPage Technical Data Dimension Sheet XSV-05/R XSV-05/2R Spare Parts Lists XSV-05R XSV-05/2R Position ID Number Designation Quick Start Guide -XSV Venturi Loader Technical Assistance Parts Department