Chapter 2: Installation
»
These installation instructions are intended for people with skills in electrical and mechanical areas due to their training, experience and received instructions.
Personnel using these installation instructions must be educated about regulations for accident prevention, operating conditions and safety regulations. Make sure all personnel are informed accordingly. The installation instructions provided in the corresponding operating instructions apply for all connected equipment.
Follow safety regulations with regard to lifting gear handling.
All installation work must be carried out with the electrical power and compressed air supply OFF.
For installation work taking place at heights of over approx. 6 feet, use only ladders or similar equipment and working platforms intended for this purpose. At greater heights, the proper equipment for protection against falling must be worn.
Use only suitable lifting gear, which is in proper working order and load suspension devices with sufficient carrying capacity. Do not stand or work under suspended loads!
Use suitable workshop equipment.
Install the equipment such that all parts are easily accessible; this facilitates maintenance and repair work.
10of 36 |