2-4 Connecting the Compressed Air Supply
Before connecting the compressed air supply, check the following:
Check compressed air piping for correct installation and assembly.
Check the fittings, length and quality of the hose connections for agreement with requirements.
Check all compressed air lines for leakages.
You need a compressed air supply with
The air should be free of oil and water.
1.Find the compressed air hose, which has been supplied.
2.Connect it to the venturi assembly and to the control and maintenance unit.
3.The
4.Connect the control and maintenance unit to the compressed air supply. Max. input pressure 145 psi (10 bar) system pressure.
5.Set the pressure on the pressure reducer at
Figure 3: Venturi Assembly
Maximum input pressure: 145 psi (10 bar) system overpressure.
Maximum output pressure: 90 psi (6 bar).
14 of 36 |