Sterling SSV-052R, SSV-05R operating instructions Quick Start Guide -XSV Venturi Loader

Page 36

6-3 Quick Start Guide –XSV Venturi Loader

Unpack all parts. Check for the following:

•Conveying hopper with level sensor

•Control and maintenance unit

•Venturi assembly

•Vinyl flexible hose

•Compressed air hose

•Operating instructions

•Mount the conveying hopper using the flange provided on its base.

•Mount the control module at a location that is readily accessible. Make sure that the compressed air hose and level sensor cable are long enough to reach the control module.

•Connect the compressed air supply from the control module to the fitting located on the material pick up wand.

•Connect shop compressed air to the regulator on the control module. Compressed air connection must be 70-90 psi (5-6 bar).

•Plus the control module into the main power socket. Make sure that the correct voltage is being used.

•Adjust the level sensor to sense the material that is being conveyed into the conveying hopper.

•Maintain the unit as stated in Chapter 5 of this manual.

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style

35 of 36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents SSV-05R Page Parts and Service Department Table of Contents Safety Instructions Page Explanations and Information Operating PersonnelFor Your Safety How to Use This ManualMaintenance Responsibility Unit Safety Installation General Information XSV-05 PartsInstalling the Conveyor Hopper Installing the Control and Maintenance Unit Control and Maintenance UnitConnecting the Compressed Air Supply Venturi AssemblyElectrical Connection Check with the local electricity board for regulationsFunctional Description Method of FunctioningControl and Maintenance Unit Setup Setting the Mixing Ratio of the Components XSV-05/2R UnitsPreparations Basic Setting of the Filling Level in the Conveyor Hopper Filling Level Too HighFine Adjustment of the Filling Level in the Conveyor Hopper Maintenance Maintenance Intervals DailyCleaning/Replacing the Filter Cartridge XSV-05Adjusting the Level Probe DisassemblyTroubleshooting ProblemPage Technical Data Dimension Sheet XSV-05/R XSV-05/2R Spare Parts Lists XSV-05R XSV-05/2R Position ID Number Designation Quick Start Guide -XSV Venturi Loader Technical Assistance Parts Department
Top Page Image Contents