Sterling SSV-052R, SSV-05R operating instructions General Information, XSV-05 Parts

Page 12

2-1 General Information

Unpack all parts of the single conveyor unit and make sure that every thing is available:

•conveyor hopper with level sensor (1)

•control and maintenance unit (2)

•one venturi assembly (3)

•one section of vinyl flexible hose (4) with two hose clamps

•compressed-air hose

•operating instructions

The XSV-05/2R comes with two venturi assemblies.

The XSV-05/2R comes with two sets of vinyl flexible hose and four hose clamps.

Figure 1: XSV-05 Parts

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style

11 of 36

Image 12

Contents SSV-05R Page Parts and Service Department Table of Contents Safety Instructions Page Explanations and Information Operating PersonnelFor Your Safety How to Use This ManualMaintenance Responsibility Unit Safety Installation General Information XSV-05 PartsInstalling the Conveyor Hopper Installing the Control and Maintenance Unit Control and Maintenance UnitConnecting the Compressed Air Supply Venturi AssemblyElectrical Connection Check with the local electricity board for regulationsFunctional Description Method of FunctioningControl and Maintenance Unit Setup Setting the Mixing Ratio of the Components XSV-05/2R UnitsPreparations Basic Setting of the Filling Level in the Conveyor Hopper Filling Level Too HighFine Adjustment of the Filling Level in the Conveyor Hopper Maintenance Maintenance Intervals DailyCleaning/Replacing the Filter Cartridge XSV-05Adjusting the Level Probe DisassemblyTroubleshooting ProblemPage Technical Data Dimension Sheet XSV-05/R XSV-05/2R Spare Parts Lists XSV-05R XSV-05/2R Position ID Number Designation Quick Start Guide -XSV Venturi Loader Technical Assistance Parts Department