Sterling SSV-052R, SSV-05R operating instructions Unit Safety

Page 10

1-4 Unit Safety

•The unit may ONLY be used for conveying cylindrical plastic granules and regrind on injection molding machines.

•NEVER change the settings unless you are able to foresee the consequences.

•Use ONLY original manufacturer parts.

•Follow a regular maintenance schedule.

•Keep records of all maintenance and repair work.

•Be aware that electronic subassemblies may be damaged by static discharge.

•Before initial operation and at regular intervals, check all electrical connections for proper fit.

•NEVER modify sensors without knowing their precise functions.

•Make sure all plugs are connected properly.

•Note the carrying capacity of the machine flange.

•Read the operating manuals of the connected units.

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style

9 of 36

Image 10

Contents SSV-05R Page Parts and Service Department Table of Contents Safety Instructions Page Explanations and Information Operating PersonnelFor Your Safety How to Use This ManualMaintenance Responsibility Unit Safety Installation General Information XSV-05 PartsInstalling the Conveyor Hopper Installing the Control and Maintenance Unit Control and Maintenance UnitConnecting the Compressed Air Supply Venturi AssemblyElectrical Connection Check with the local electricity board for regulationsFunctional Description Method of FunctioningControl and Maintenance Unit Setting the Mixing Ratio of the Components XSV-05/2R Units SetupPreparations Basic Setting of the Filling Level in the Conveyor Hopper Filling Level Too HighFine Adjustment of the Filling Level in the Conveyor Hopper Maintenance Maintenance Intervals DailyCleaning/Replacing the Filter Cartridge XSV-05Adjusting the Level Probe DisassemblyTroubleshooting ProblemPage Technical Data Dimension Sheet XSV-05/R XSV-05/2R Spare Parts Lists XSV-05R XSV-05/2R Position ID Number Designation Quick Start Guide -XSV Venturi Loader Technical Assistance Parts Department