Bosch Power Tools 4410, 4310 manual Slide Action Adjustment, Screws in order as shown in figure

BM 2610012089 03-10 E:BM 2610012089 03-10 E 3/30/10 7:40 AM Page 18

Adjustments

!WARNING Disconnect plug from power source before performing any as-

sembly, adjustment or repair to avoid possible injury.

	Slide Action Adjustment
1.	Locate the 4 Set Screws (A, B, C, & D) on the
	Rail Guide Housing. (Figure 14)
2.	Loosen the Nut on Set Screw (A) with an ad-
	justable wrench.
3.	Tighten or loosen Set Screw (A) with the 4mm
	end of the bit on the multi-purpose tool until you
	achieve minimal slide play while maintaining the
	desired sliding force.
4.	After adjusting Set Screw (A), hold Set Screw
	(A) with a 4mm allen key and tighten the nut with
	an adjustable wrench without moving the Set
	Screw. (Figure 15)
5.	Complete steps 2-4 with the remaining set	figure 14. Set Screws
	screws in order as shown in figure 14.

figure 15. Adjust and Tighten Set Screw

-18-