Shindaiwa DGW310DMC, DGW310MC Water Temperature Monitor Lamp, Battery Charge Monitor Lamp

Page 13

(1) Water Temperature Monitor Lamp

Danger: Injuries

Close all the doors and place lock during operation, to avoid injuries by unintentional touch of cooling

fan or fan belt.

Danger: Burns

Caution: Burns

Do not touch the engine and muffler during operation and immediately after stopping it, for

When the water temperature rises abnormally, the water temperature lamp flashes and the automatic

shutdown will be engaged.

 

 

When this happens, check water tank and replenish if needed.

Refer to 6-2. Check the water

temperature

 

 

If the water level is normal, there may be possibility of overload. Always use the equipment within the

rated duty cycle and output power.

 

 

(2) Battery Charge Monitor Lamp

When the battery charge becomes unable during operation, the monitor lamp flashes and the automatic

shutdown is engaged.

 

Please consult with our authorized distributor or service section.

 

Caution

 

The monitor cannot detect battery degradation or insufficient battery liquid.

 

Be sure to check battery liquid level periodically.

 

(Refer to 6-5. Battery Check )

(3) Oil Pressure Monitor Lamp

Danger:Injuries

Close all the doors and place lock during operation, to avoid injuries by unintentional touch of cooling fan or fan belt.

11

Image 13
Contents DGW310DMC DGW310MC Page Other types of caution Even som e of the items noted IntroductionSafety Guidelines Page Page Location of warning labels DGW310DMC DGW310MC SpecificationsUse DGW310DMC DGW310MC DGW310DMC Display Eco WeldingFrequency Selection Monitor LampBattery Charge Monitor Lamp Water Temperature Monitor LampOil Pressure Monitor Lamp How to connect remote control box Remote Control Box OptionElcb and Grounding Operation Check GroundingStop RUN StopElcb has activated Slow-down』FeatureSAE30 SAE20 Full Filling the sub tankFilling the radiator Fuel, Engine Oil and Water Leakage FuelFluid level is lower than the Lower level BatteryStart StartingKeep the engine idle for about 5 minutes Selection Welding Cable StoppingConnection Welding Cable PolarityDGW310DMC WeldingDGW310MC ECOMIN MAX ECO Output Range P 200/220V 3-P 4-Wires21-P 200/220V P 100/110VOutput Limitation Power ConsumptionOutput Operation 』29 Simultaneous use of Generating and Welding Check and Maintenance Check Time Check Items Startup 1Change Engine Oil Change Oil Filter Clean/Change Air ElementClose Clean/Change Fuel StrainerChange Coolant/Water Long-Term StorageTroubleshooting Dual Regular( ) Memo