Shindaiwa DGW310DMC, DGW310MC owner manual Keep the engine idle for about 5 minutes

Page 23

7. Keep the engine idle for about 5 minutes.

Slow-down switch

Breaker

Starter

Fuel lever

Close

 

 

Open

Restarting after stopping due to fuel shortage

This equipment is incorporated in automatic vacuuming air feature. Therefore, even though the engine stops due to fuel run out, you can restart the engine easily by the following steps.

1.

Turn the breakers to OFF

 

2.

 

 

 

Turn the starter switch to

STOP .

3. Fill the fuel.

 

 

 

 

4.

Turn the slow-down switch to

ON .

5. Turn the starter switch to

 

START and drive the starter motor for about 10 seconds.

 

 

 

 

6. Release the starter switch, promptly as the engine started.

7. Wait for about 1 minute to vacuum the air out. The engine peed becomes stable when the air is extracted.

Caution

Never turn the engine NORMAL speed or connected the loads until the air is extracted completely (until the engine becomes stable).

21

Image 23
Contents DGW310DMC DGW310MC Page Other types of caution Even som e of the items noted IntroductionSafety Guidelines Page Page Location of warning labels DGW310DMC DGW310MC SpecificationsUse DGW310DMC DGW310MC DGW310DMC Monitor Lamp Eco WeldingDisplay Frequency SelectionOil Pressure Monitor Lamp Water Temperature Monitor LampBattery Charge Monitor Lamp How to connect remote control box Remote Control Box OptionElcb and Grounding Stop GroundingOperation Check Stop RUNElcb has activated Slow-down』FeatureSAE30 SAE20 Filling the radiator Filling the sub tankFull Fuel, Engine Oil and Water Leakage FuelFluid level is lower than the Lower level BatteryStart StartingKeep the engine idle for about 5 minutes Selection Welding Cable StoppingConnection Welding Cable PolarityDGW310DMC WeldingMIN MAX ECO ECODGW310MC P 100/110V P 200/220V 3-P 4-WiresOutput Range 21-P 200/220VOutput Power ConsumptionOutput Limitation Operation 』29 Simultaneous use of Generating and Welding Check and Maintenance Check Time Check Items Startup 1Change Engine Oil Change Oil Filter Clean/Change Air ElementClose Clean/Change Fuel StrainerChange Coolant/Water Long-Term StorageTroubleshooting Dual Regular( ) Memo