Shindaiwa DGW310MC, DGW310DMC Output Range, P 200/220V 3-P 4-Wires, 21-P 200/220V, P 100/110V

Page 28

9. Genrating Operation

9-1. Output Range

(1) 3-P 200/220V (3-P 4-Wires)

Maximum output from the terminals at 200/220 9.9kVA

(2)1-P 200/220V

1-P 200/220V is supplied by 1 pair out of 3 terminals. Max. output by 1 pair is 6kVA and the maximum output for 3 pairs total is 8kVA, which please note. You should connect the load for 3 pairs evenly as possible to terminals.

(3) 1-P 100/110V

1-P 100/110V is supplied by 2 receptacles and1-P terminal set. Max 1.5kVA is supplied through 1 receptacle and max 3kVA is supplied from 1-P terminal set.

Max output by 2 receptacles and 1 terminal set is 6kVA.

U V W O

UP to 9.9 kVA

U V W O

Upto6kVAUpto6kVA

Upto6kVA

Total 8kvA max

up to 1.5kVA

Receptacle

 

Up to 1.5kVA

Terminal

up to 3kVA

 

Total 6kVA

 

26

Image 28
Contents DGW310DMC DGW310MC Page Introduction Other types of caution Even som e of the items notedSafety Guidelines Page Page Location of warning labels Specifications DGW310DMC DGW310MCUse DGW310DMC DGW310MC DGW310DMC Eco Welding DisplayFrequency Selection Monitor LampBattery Charge Monitor Lamp Water Temperature Monitor LampOil Pressure Monitor Lamp Remote Control Box Option How to connect remote control boxElcb and Grounding Grounding Operation CheckStop RUN StopSlow-down』Feature Elcb has activatedSAE30 SAE20 Full Filling the sub tankFilling the radiator Fuel Fuel, Engine Oil and Water LeakageBattery Fluid level is lower than the Lower levelStarting StartKeep the engine idle for about 5 minutes Stopping Selection Welding Cable Polarity Connection Welding CableWelding DGW310DMCDGW310MC ECOMIN MAX ECO P 200/220V 3-P 4-Wires Output Range21-P 200/220V P 100/110VOutput Limitation Power ConsumptionOutput Operation 』29 Simultaneous use of Generating and Welding Check and Maintenance Check Time Check Items Startup 1Change Engine Oil Clean/Change Air Element Change Oil FilterClean/Change Fuel Strainer CloseLong-Term Storage Change Coolant/WaterTroubleshooting Regular Dual( ) Memo